Special electronic capacitor for the breaker ignition system on your Piaggio Ciao, Si, Bravo, and Boxer moped.
The CDI box uses the breaker only as a timing signal source and simultaneously replaces the capacitor. Problems with worn breaker contacts and low-quality capacitors are now a thing of the past. In addition, your ignition coil can generate higher voltages, which has a positive effect on the maximum RPM in heavily modified engines.
Dimensions: 40 x 50 x 30 mm
Advantages of the electronic ignition module:
- no wear and tear
- maintenance-free
- Higher voltage in the upper RPM range
- Higher RPMs possible than with conventional contact ignition
Installation:
- Install the box near the external ignition coil, e.g., on the engine mount bolt.
- Remove the capacitor from your contact ignition system.
- Connect the breaker to the included yellow wire and route it along the ignition wire to the outside.
- Ground the black wire (e.g., to the frame).
- Connect the original ignition cable to the ignition unit.
- Connect everything to the external ignition coil.
Detailed installation instructions are included with the product.
Notes: The breaker gap remains at 0.4–0.5 mm. Make sure the wiring is routed properly within the ignition system so that it isn’t damaged by the rotating flywheel. Your ignition coil continues to supply the same voltage as before, so there’s no need to replace the bulbs.
You can find alternative ignition modules and capacitors in the accessories section.
Manufactured by the Italian brand Pinasco.
| Manufacturer | Pinasco |
| Capacity | 0.33 µF |
| Area of application | Standard |
| Mounting type | Nuts & bolts |
| Connection type | Plug connection |
| Ø mounting hole | 6.5 mm |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Height: 26 mm · Manufacturer: swiing® revival parts · Capacity: 0.28 µF · Mounting type: Tab for screwing · Ø outside: 18 mm · Connection type: Cable for screwing · Ø mounting hole: 4.4 mm · Total height: 31 mm · Area of application: Original · Area of application: Standard · Piaggio OEM number: 102939
13,90 EUR
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 18 mm · Manufacturer: EFFE · Capacity: 0.28 µF · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø mounting hole: 4.5 mm · Height: 27 mm · Area of application: Standard · Piaggio OEM number: 114471
27,90 EUR
GPO ignition cable | Piaggio Ciao, SI, Bravo, Boxer
Color: black · Color: gray · Manufacturer: GPO · Material: Copper · Material: Rubber · Number of cables: 1 pcs · Tension: 6 V · Tension: 12 V · Cable length: 450 mm · Area of application: Standard · Piaggio OEM number: 149504
11,60 EUR
Not in stock
CIF ignition coil | Piaggio Ciao, SI, Bravo, Boxer
Height: 40 mm · Total length: 70 mm · Manufacturer: CIF · Area of application: Standard · Ø cable holder: 7.5 mm · Color: blue · Ø mounting hole: 5.2 mm · Place of use: External (outside the ignition) · Mounting type: Nuts & bolts · Hole spacing: 33 mm · Number of fixing points: 2 pcs · Piaggio OEM number: 244114
44,20 EUR
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
11,60 EUR
Plastic license plate holder (CH version)
Manufacturer: Made in Switzerland · Material: Brass · Material: Plastic · Color: black · Width: 108 mm · Mounting type: Nuts & bolts · Total length: 175 mm · Ø mounting hole: 6 mm · Thread type: M5x0.8 (standard thread) · Height: 11 mm · Number of fixing points: 9 pcs · Hole spacing: 50 mm · Thread length: 6 mm
9,20 EUR
GPO ignition cable | Piaggio Ciao, SI, Bravo, Boxer
Color: black · Color: gray · Manufacturer: GPO · Material: Copper · Material: Rubber · Number of cables: 1 pcs · Tension: 6 V · Tension: 12 V · Cable length: 450 mm · Area of application: Standard · Piaggio OEM number: 149504
11,60 EUR
Not in stock
Working late? Evening hours on Thursday until 20:00
