
Racing air filter with foam and plastic cap for your moped, moped and small motorcycle.
This racing air filter is particularly suitable for cross racing as it protects against rain and dirt. The well-placed intake openings ensure optimum air supply.
The air filter is clamped to the carburettor using a clamp.
Ø Carburettor connection: 32 mm
Connection angle: 90°
Total length: 140 mm
Quality product from the Italian manufacturer Polini.
| Manufacturer | Polini |
| Camouflaged | No |
| Color | black, blue |
| Filter type | Foam |
| Total length | 140 mm |
| Ø Internal connection | 32 mm |
| Area of application | Tuning |
| Mounting type | Plug connection clamped |
| Angle | 90 ° |
Accessories & related products
Polini air filter BIG EVO Ø 28/35/42/45/49/55 mm conical / straight
Manufacturer: Polini · Camouflaged: No · Material: Foam · Material: Rubber · Height: 100 mm · Filter type: Foam · Length rubber part: 13 mm · Length of filter section: 127 mm · Area of application: Tuning · Ø Internal connection: 28 mm · Ø Internal connection: 35 mm · Ø Internal connection: 42 mm · Ø Internal connection: 45 mm · Ø Internal connection: 49 mm · Ø Internal connection: 55 mm · Mounting type: Plug connection clamped · Mounting type: Screwed clamp · Color: black · Color: blue · Width: 150 mm · Total length: 140 mm
69,90 EUR
Polini air filter BIG EVO Ø 28/35/42/45/49/55 mm cylindrical / angled
Manufacturer: Polini · Area of application: Tuning · Material: Foam · Material: Rubber · Color: blue · Color: gray · Filter type: Foam · Length rubber part: 11.3 mm · Length of filter section: 60 mm · Length of filter section: 85 mm · Ø Internal connection: 28 mm · Ø Internal connection: 35 mm · Ø Internal connection: 42 mm · Ø Internal connection: 46 mm · Ø Internal connection: 49 mm · Ø Internal connection: 55 mm · Mounting type: Plug connection clamped · Mounting type: Screwed clamp · Angle: 75 ° · Ø outside: 95 mm · Total length: 100 mm · Camouflaged: No
69,90 EUR
Explore categories from Carburetor & intake system
Moped fans also bought
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Number of components: 7 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
11,60 EUR
Dell'Orto 19 mm PHBG CS carburetor hand choke
Nominal diameter: 19 mm · Manufacturer: Dell'Orto · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG CS · Ø without reducing sleeve: 26 mm · Height: 124 mm · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Total length: 82 mm · Mixed oil connection: Yes · Width: 70 mm · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 75 · Size of secondary nozzle: 45
139,90 EUR
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Test mark: none · Surface: chrome-plated · Color: Chrome · Thread type: M8x1.25 (standard thread) · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Clamping diameter: 22 mm · Thread size: M8 · Total length: 360 mm
32,60 EUR
swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92
24,40 EUR
swiing® revival nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110
24,40 EUR
AKOA 21 mm intake manifold Dell'Orto PHBG plastic | Puch E50 / Z50 / ZA50 (wind cooled)
Manufacturer: AKOA · Material: Plastic · Area of application: Tuning · Color: black-matt · Ø External connection: 26 mm · Mounting type: Screws · Ø inside: 20.7 mm · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs
34,90 EUR
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
11,60 EUR










