Shaft seal oil seal (colloquially known as oil seal) with sealing lip made of PTFE (colloquially known as Teflon) with the dimensions 15/24/5 mm (15x24x5) for use on the crankshaft on your Piaggio Ciao, Si, Bravo and Boxer moped / moped.
This radial shaft seal with fluorine rubber outer jacket is resistant up to a temperature of 200°C, whereas conventional NBR shaft seals are only resistant up to 100°C.
This radial seal ring made of FPM / FKM (commonly known as Viton) has an additional sealing lip made of PTFE, a material with a high thermal load capacity that does not interact with the lubricant and can therefore withstand the highest loads.
You can find more sealing rings for your Piaggio in the accessories section.
Quality product from the Italian manufacturer Polini.
Manufacturer: Polini · Material: FPM / FKM (colloquially known as Viton) · Surface: rubberized · Area of application: Racing · Place of use: Universal · Temperature resistance (min.): -30 - 200 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 15 mm · Ø outside: 24 mm · Width: 5 mm
| Shaft seal type | AS - With rubberized outer casing / one sealing lip / one dust lip. |
| Ø outside | 24 mm |
| Manufacturer | Polini |
| Material | FPM / FKM (colloquially known as Viton) |
| Surface | rubberized |
| Place of use | Crankshaft |
| Ø inside | 15 mm |
| Temperature resistance (min.) | -30 - 200 °C |
| Width | 5 mm |
| Area of application | Racing |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
Ratings
Accessories & related products
Malossi oil seal FPM 15/24/5 A crankshaft | Piaggio Ciao, SI, Bravo, Boxer
Place of use: Crankshaft · Temperature resistance (min.): -30 - 200 °C · Shaft seal type: A - With rubberized outer part / one sealing lip. · Ø inside: 15 mm · Ø outside: 24 mm · Width: 5 mm · Manufacturer: Malossi · Material: FPM / FKM (colloquially known as Viton) · Surface: rubberized
16,70 EUR
Oil seal FPM 15/24/5 AS crankshaft original | Piaggio Ciao, SI, Bravo & Boxer
Place of use: Crankshaft · Temperature resistance (min.): -30 - 200 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 15 mm · Ø outside: 24 mm · Width: 5 mm · Manufacturer: Piaggio · Material: FPM / FKM (colloquially known as Viton) · Surface: rubberized
10,60 EUR
Explore categories from Seals & gaskets
Moped fans also bought
Hot 
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Area of application: Standard
2,80 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Drive: Slot · Total length: 6 mm · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
2,35 EUR
CIF Clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: CIF · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Ø outside: 11 mm · Screw head: Hexagon · Total length: 25 mm · Thread type: M7x1 (standard thread) · Thread length: 19.5 mm · Number of components: 6 pcs · Width across flats: 11 mm
4,55 EUR
Polini oil seal FPM / PTFE 15/24/5
Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 15 mm · Ø outside: 24 mm · Width: 5 mm · Manufacturer: Polini · Material: FPM / FKM (colloquially known as Viton) · Area of application: Racing · Surface: rubberized · Place of use: Universal · Temperature resistance (min.): -30 - 200 °C
16,90 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
