Black racing handlebars in carbon look with bolted crossbar for your moped, moped and small motorcycle. The aluminum handlebar is mounted on the fork plate.
Both balance ends are slightly bent backwards, the left handlebar end is also knurled for additional grip. This extra-wide design gives you maximum control even at high speeds.
Height: 80 mm
Width: 820 mm
Ø tube: 22 mm
Length handlebar ends (for grip mounting): 235 mm
Length fork plate mount: 140 mm
Matching attachments such as clamps, steerer nuts, grips, etc. can be found in the accessories
.| Material | Aluminum |
| Ø outside | 22 mm |
| Color | Carbon |
| Fork plate holder length | 140 mm |
| Height | 80 mm |
| Length handlebar ends | 235 mm |
| Clamping diameter | 22 mm |
| Crossbar | Yes |
| Mounting type | Fork plate |
| Width | 820 mm |
| Ø Strut | 12 mm |
| Strut length | 240 mm |
Ratings
Accessories & related products
swiing® revival steerer tube nut M26x1 closed fork plate Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Ø outside: 36.6 mm · Height: 14 mm · Width across flats: 30 mm
22,20 EUR
Explore categories from Handlebar & stem
Moped fans also bought
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 910 mm · Ø Silencer: 54.5 mm · Ø outside: 59 mm · Flame tube attachment: Flange · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Ø Flame tube outside: 22 mm · Exhaust type: Flute
176,10 EUR
Not so nice 
15 mm intake manifold | Puch E50
Ø inside: 14.5 mm · Total height: 54 mm · Material: Aluminum · Camouflaged: Yes · Mounting type: Screws · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Total length: 47 mm · Area of application: Tuning · Height flange center hole: 43 mm · Hole spacing inlet: 38 mm
14,00 EUR
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Chain pitch: 1/2" x 3/16" · Ø mounting hole: 6.7 mm · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Thickness: 4.5 mm · Ø inside: 94 mm · Hole spacing: 36.5 mm · Number of fixing points: 6 pcs · Hole spacing 2: 68 mm · Cranking (offset): 8 mm
23,40 EUR
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Number of components: 7 pcs · Area of application: Standard · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm
11,60 EUR
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Material: Polyvinyl chloride (PVC) · Place of use: Frame (+ tank) · Color: black · Color: white · Width: 123 mm · Width: 230 mm · Width: 330 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Height: 26 mm · Height: 60 mm · Height: 65 mm
11,00 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Ø outside: 5 mm · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
2,35 EUR
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: angular · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Mounting type: Nuts & bolts · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Wheel size: 17 "
41,00 EUR
Collection only possible with online purchase and appointment.
