Not so nice 
Copy of the KTM SX50 clutch suitable for all Puch Maxi mopeds / mopeds with E50 engine.
Attention: The clutch hub does not fit Puch Maxi crankshafts as the cone is not correct.
The cone can either be reworked or alternatively the high-quality matching MBR clutch star, which is listed under accessories, can be used.
Tightening torque on crankshaft: 35 - 40 Nm
Tightening torque screws for jaws: 10 Nm
The fastening nut is not included in the scope of delivery.
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we understand, but cannot offer you any guarantee or exchange.
The clutch is a cheap replica, the clutch linings therefore last less than the original KTM linings. During tests in our racing team, the clutch usually lasted between 1 and 2 hours, after which the linings had to be replaced. The star, the springs and also the fastening screws are advantageously used from the original KTM clutch.
High-quality alternatives can be found in the accessories section.
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Area of application | Tuning |
| Puch | E50 |
Accessories & related products
MBR Clutch KTM SX50 | Puch E50
Manufacturer: MBR · Material: Steel · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
395,10 EUR
Moped fans also bought
GPO gasket set | Puch E50
Manufacturer: GPO · Number of components: 7 pcs · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Area of application: Standard
11,50 EUR
BOSCH screw-in condenser | Bosch / Ducati
Manufacturer: BOSCH · Capacity: 0.2 µF · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Ø outside: 18 mm · Height: 27 mm · Thread type: M3x0.5 (standard thread) · Area of application: Original · Area of application: Standard · Total height: 33.5 mm · Alternative version of the Pony OEM number: A2090 · Pony OEM number: A2092 · Alternative version of the Sachs OEM number: 0265 052 003 · Sachs OEM no.: 0265 052 007 · BOSCH OEM number: 2 207 330 050
23,10 EUR
BOSCH Breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Ø axle: 4 mm · Material: Steel · Ø Internal flywheel: 90 mm · Cable available: Yes · Cable length: 100 mm · Area of application: Original · Area of application: Standard · Ø mounting hole: 4.5 mm · Number of fixing points: 1 pcs · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · Pony OEM number: A4607 · Sachs OEM no.: 0283 116 102 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · BERU OEM number: 0 340 100 710 · BOSCH OEM number: 1 217 013 025
23,10 EUR
DUCATI ignition coil (1A quality)
Manufacturer: DUCATI · Place of use: Internal (in the ignition) · Ø cable holder: 5.9 mm · Cable length: 37 mm · Total length: 76.5 mm · Color: black · Ø Internal flywheel: 90 mm · Ø mounting hole: 4.6 mm · Area of application: Original · Area of application: Standard · Hole spacing: 54 mm · Mounting type: Screws · Height: 17 mm · Number of fixing points: 2 pcs · Pony OEM number: A2114 · Alternative version of the Pony OEM number: A2116 · Alternative version of the Pony OEM number: A2118 · Pony OEM number: A5524 · Alternative version of the Sachs OEM number: 0265 142 002 · Alternative version of the Sachs OEM number: 0265 142 004 · Sachs OEM no.: 0265 132 100 · Sachs OEM no.: 0265 203 001
75,50 EUR
swiing® ingenious crankshaft "High End" | Tomos Classic, Quadro, Sprint, Fun Sport'R
Manufacturer: swiing® ingenious parts · Cheek type: Full cheeks · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 93 mm · Total length crankpin ignition side: 64 mm · Ø crank webs: 70 mm · Ø piston pin (B): 12 mm · Thread type: MF10x1 (fine pitch thread) · Wide crank webs: 34 mm · Area of application: Racing · Tomos OEM number: 223421
156,80 EUR
Not in stock
Collection only possible with online purchase and appointment.
