Rubber sleeve for pipe bends and adjustment screws on various Dell'Orto SHA and PHBG carburetors, which are installed on models such as the Piaggio Ciao, Si, Bravo, Boxer, Pony Cross 521, Cilo Cross 521, Pony GTX 521, etc. mopeds.
Length: 30 mm
; inner diameter at bottom: 7 mm
; inner diameter at top: 4 mm
The seal protects against air leaks and unwanted water ingress.
| Ø inside | 7 mm |
| Material | Rubber |
| Color | black |
| Ø inside 2 | 4 mm |
| Total length | 30 mm |
| Universal | |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 503 - AAL , ABL , 2AL / 2BL , AB , AC , ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT) , 2A (HG) 508 - 1 A 535 |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
| Zündapp Belmondo | |
| Tomos |
Accessories & related products
BING rubber grommet Ø 8 mm carburetor pipe bend
Ø inside: 8 mm · Ø outside: 12 mm · Manufacturer: BING · Material: Rubber · Color: black · Clamping diameter: 4 mm · Total length: 29 mm · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
4,55 EUR
GPO 85° Carburetor Elbow M6x0.75
Ø outside: 6 mm · Height: 30 mm · Manufacturer: GPO · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: M5x0.8 (standard thread) · Angle: 85 ° · Total length: 45.5 mm · Total length: 53.5 mm · Width across flats nut: 8 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
6,90 EUR
swiing® revival 80° carburetor pipe bend M6x0.75
Ø outside: 6 mm · Height: 35 mm · Manufacturer: BING · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 80 ° · Total length: 41.5 mm · Total length: 50 mm · Width across flats nut: 7 mm · Width across flats nut: 8 mm
8,05 EUR
Dell'Orto 30° carburetor elbow set M6x0.75
Ø outside: 6 mm · Height: 13 mm · Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 30 ° · Total length: 43 mm · Total length: 50 mm · Width across flats nut: 7 mm
13,90 EUR
Dell'Orto 90° carburetor elbow set M6x0.75 (long thread)
Ø outside: 6 mm · Height: 31 mm · Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: M5x0.8 (standard thread) · Angle: 90 ° · Total length: 39 mm · Total length: 49 mm · Width across flats nut: 7 mm
13,90 EUR
Dell'Orto 45° carburetor pipe bend M6x0.75
Ø outside: 6 mm · Height: 56 mm · Height: 61 mm · Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 45 ° · Total length: 34.5 mm · Total length: 42 mm · Width across flats nut: 8 mm
8,05 EUR
Explore categories from Silent blocks & rubber parts
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Area of application: Standard · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø outside: 8 mm · Width across flats: 7 mm · Thread type: M6x1 (standard thread) · Ø Bundle: 6 mm · Total length: 15 mm · Thread length: 7 mm
2,90 EUR
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm
2,80 EUR
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Nipple length: 10 mm · Number of components: 1 pcs
2,80 EUR
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm
2,35 EUR
BING rubber grommet Ø 8 mm carburetor pipe bend
Ø inside: 8 mm · Ø outside: 12 mm · Manufacturer: BING · Material: Rubber · Color: black · Clamping diameter: 4 mm · Total length: 29 mm · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
4,55 EUR
swiing® revival 80° carburetor pipe bend M6x0.75
Ø outside: 6 mm · Height: 35 mm · Manufacturer: BING · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 80 ° · Total length: 41.5 mm · Total length: 50 mm · Width across flats nut: 7 mm · Width across flats nut: 8 mm
8,05 EUR
Working late? Evening hours on Thursday until 20:00
