Black, adjustable shock absorbers with pink coil springs for your moped, moped and small motorcycle.
The hardness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
| Color | pink, black |
| Surface | varnished |
| Damping type | Spring |
| Ø spars | 30 mm |
| Total length | 330 mm |
| Adjustable | Yes |
| Ø outside | 50 mm |
| Number of fixing points | 2 pcs |
| Mounting type | Nuts & bolts |
| Ø Fastening inside | 10 mm |
| Hole spacing | 300 mm |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,60 EUR
2.560,00 EUR/l
YSS shock absorber Racing 30 cm (oil pressure)
Ø outside: 52 mm · Total length: 335 mm · Manufacturer: YSS · Material: Steel · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø spars: 32 mm · Ø Fastening inside: 10 mm · Hole spacing: 330 mm · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts
163,30 EUR
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M8x1.25 (standard thread) · Material: Steel · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
20,90 EUR
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Material: Aluminum · Material: Steel · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Ø spars: 24 mm · Total length: 335 mm · Adjustable: Yes · Ø outside: 46 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Hole spacing: 300 mm
58,20 EUR
Explore categories from Shock absorber & swingarm
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Width: 105 mm · Height: 5.3 mm · Ø mounting hole: 5 mm · Thread length: 8 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread type: M5x0.8 (standard thread)
12,70 EUR
Hot
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
10,30 EUR
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Total length: 66 mm · Choke control: Hand choke · Width: 50 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Area of application: Tuning · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
75,70 EUR
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Camouflaged: Yes · Total length: 47 mm · Ø External connection: 20 mm · Ø inside: 14.5 mm · Hole spacing inlet: 38 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Tuning · Total height: 54 mm · Height flange center hole: 43 mm
13,90 EUR
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Color: black · Surface: galvanized (blue) · Color: silver · Number of teeth: 10 pcs · Total length: 175 mm · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs · Thread type: M6x1 (standard thread)
11,60 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
