39 mm cylinder head without decompressor bore to fit the 39 mm swiing original and tuning cylinder kit for Zündapp Belmondo mopeds, Zündapp Bergsteiger M25/M50 mopeds, as well as Alpa Spezial 3000 and Alpa Black River small motorcycles which have a Zündapp type 247 engine installed.
Top workmanship and highest fitting accuracy.
The shoulder on the gasket side ensures that the cylinder head is perfectly centered on the cylinder.
You can find the matching cylinders in the accessories section.
Pay attention: If you want to install this cylinder head on an original Zündapp cylinder, you must raise it by 1.5 mm to prevent the piston from touching the head.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Ø cylinder | 39 mm |
| Number of fixing points | 4 pcs |
| Decompressor | No |
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Accessories & related products
Loctite 638 High-strength adhesive 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Gap dimension (max.): 0.25 mm · Temperature resistance (min.): -75 - 150 °C · Type of application: 1K · Alignment time: 300 sec · Color: green · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
25,50 EUR
2.550,00 EUR/l
swiing® ingenious piston 39 mm Vertex | Zündapp Belmondo Type 247
Manufacturer: swiing® ingenious parts · Nominal diameter: 39 mm · Ø outside piston (A): 38.95 mm · Compression height (C): 26.3 mm · Curvature (D): 1.5 mm · Total piston height (E): 51.5 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Oblique push · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm · Piston weight: 82 g
69,60 EUR
Moped fans like you also bought:
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Number of components: 4 pcs · Manufacturer: GPO · Area of application: Tuning · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Ø outlet inside: 22 mm · Hole pattern [mm]: 44 x 44 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Decompressor: Yes
10,30 EUR
swiing® ingenious 39 mm cylinder kit tuning with head | Zündapp Bergsteiger M25, M50 (Type 247)
Nominal diameter: 39 mm · Manufacturer: Vertex · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Decompressor: No · Camouflaged: No · Area of application: Tuning
261,40 EUR
swiing® ingenious 39 mm cylinder kit original with head | Zündapp Belmondo (Type 247)
Nominal diameter: 39 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 48 mm · Ø Inlet inside: 9.2 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 40 mm · Ø piston pin (B): 18.5 mm · Outlet type: slanted · Hole spacing outlet: 40 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 42 · Camouflaged: No
261,40 EUR
Collection only possible with online purchase and appointment.
