Useful tool for tightening the clutch spring on manual Puch X30 Sport & Puch X30 Velux mopeds / mopeds.
By pretensioning the spring, the nut can be easily mounted on the crankshaft.
The four threaded bolts with hexagon socket are screwed into the corresponding threaded holes. The clutch spring is pretensioned by tightening the four 3D nuts.
Thickness of mounting plate: 6 mm
Threaded bolts: M6 x 70 mm (with hexagon socket)
Nuts: M6 x 18 mm (SW10 mm)
Figures 4 and 5 are for illustrative purposes.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Number of components | 9 pcs |
| Thread type | M6x1 (standard thread) |
| Total length | 130 mm |
| Thickness | 6 mm |
| Area of application | Special tool |
| Width | 96 mm |
| Puch | Z50 (X30 Sport) Z50 (X30 Velux) |
Moped fans also bought
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Ø outlet inside: 22 mm · Number of components: 10 pcs · Hole spacing inlet: 32 - 38 mm · Area of application: Standard · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44
23,10 EUR
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
11,50 EUR
25,56 EUR/l
swiing® revival shim set crankshaft L17 | Puch Z50
Manufacturer: swiing® revival parts · Surface: blank / oiled · Material: Steel · Nominal diameter inside: 17 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Ø inside: 17.1 mm · Ø outside: 23.8 mm
10,30 EUR
swiing® ingenious clutch spring reinforced +20% | Puch Z50
Spring design: Pressure spring · Ø wire: 4.6 mm · Manufacturer: swiing® ingenious parts · Surface: coated · Color: blue · Material: Spring steel · Total length: 20.5 mm · Ø inside: 30 mm · Number of components: 1 pcs · Ø outside: 39 mm · Area of application: Tuning
27,80 EUR
swiing® ingenious clutch spring reinforced +40% | Puch Z50
Spring design: Pressure spring · Ø wire: 4.5 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: red · Number of components: 1 pcs · Ø outside: 39 mm · Ø inside: 30 mm · Total length: 23.5 mm
27,80 EUR
Collection only possible with online purchase and appointment.
