Special holding tool that simplifies work on the clutch or the ignition on your moped, moped and small motorcycle.
The matching bolt is pushed into the upper connecting rod eye and the plastic plate is used to cover the opening to the engine housing. When working on the flywheel, the bolt will then rest cleanly on the plate and the nut can be loosened and tightened without any problems.
The second picture serves to illustrate this.
With this simple tool, you save yourself the purchase of various different counterholders and have the right assembly tool to hand for all engines.
Alternative counterholders can be found under accessories.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Plastic |
| Diameter | 10 mm, 12 mm, 15 mm |
| Number of components | 4 pcs |
Accessories & related products
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Ø inside: 27 mm · Ø outside: 93 mm · Thickness: 5 mm · Height: 80 mm · Diameter: 19 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Area of application: Special tool · Total length: 290 mm · Ø Pin: 8 mm · Number of components: 1 pcs
68,70 EUR
Not in stock
Explore categories from Tools
Moped fans also bought
Continental 2.00 x 19" tires KKS
Inventory-managed: No · Manufacturer: Continental · Tire width: 2 " · Tire width [mm]: 50.8 · Color: black · Width: 2 " · Wheel size: 19 " · Old designation: 23 x 2 " · Speed index: B = 50 km/h · Load capacity index: 24 = 90 kg · Profile type: KKS 10 · Tire type: Allround · White wall: No · Tubeless (yes/no): Tubetype TT (requires hose)
58,20 EUR
GPO piston pin extractor Ø 10, 12, 14 mm
Number of components: 7 pcs · Manufacturer: GPO · Material: Steel · Surface: burnished · Area of application: (Dis)assembly tool · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Width across flats: 10 mm · Width across flats: 17 mm
23,20 EUR
Cable sleeve, Ø 5 x 2.2 mm, black (6-meter roll)
Ø inside: 2.5 mm · Ø outside: 5 mm · Manufacturer: Made in Italy · Ordering unit: Roll 6 meter · Material: Plastic · Material: Steel · Color: black · Area of application: Standard · Total length: 6000 mm · Coating: none · Ø cable: 2.2 mm
13,90 EUR
2,32 EUR/m
Hot 
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
11,60 EUR
Cable set E50 engine automatic black | Puch Maxi S / N
Material: Steel · Color: black · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Outer shell length: 6000 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
22,80 EUR
swiing® revival rear brake anchor plate | Puch Maxi N
Ø outside: 92 mm · Manufacturer: swiing® revival parts · Ø axle: 12 mm · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 68 mm · Total length: 135 mm · Ø screw holder: 6.5 mm · Cranking (offset): 10 mm
87,40 EUR
Working late? Evening hours on Thursday until 20:00
