Very useful tool for fixing the flywheel.
The flywheel stopper can be used on all Bosch and Ducati flywheels, as well as those with the same masses.
Stable construction made of galvanized steel. Comfortable rubber grip.
Ø outer plate: 93 mm
Ø inner plate: 51 mm
Pin spacing: 68 mm
Ø pins: 8 mm
Pin to heel length: 5.5 mm
Figure 3 shows the application of the tool.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Diameter | 19 mm |
| Material | Steel |
| Surface | galvanized (blue), rubberized |
| Ø inside | 27 mm |
| Total length | 290 mm |
| Height | 80 mm |
| Ø Pin | 8 mm |
| Ø outside | 93 mm |
| Thickness | 5 mm |
| Number of components | 1 pcs |
| Area of application | Special tool |
| Universal | |
| Puch | |
| Sachs | 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 50/5 503 - AAL , ABL , 2AL / 2BL , AB , AC , ADV 505 (with pedal shaft) - 1A (AT) , 2A (HG) 535 |
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Ratings
Accessories & related products
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Weight: 337 g · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5 · Thread type: MF27x1 LH (fine/left-hand thread)
111,90 EUR
Bosch flywheel clockwise NOS | Puch E50
Manufacturer: BOSCH · Weight: 900 g · Material: Steel · Ø Internal flywheel: 91.2 mm · Direction of rotation: right · Height: 36.6 mm · Thread length: 6.5 mm · Ø cone small inside: 11.9 mm · Ø cone large inside: 15 mm · Ø Flywheel outside: 115.8 mm · Cone length: 17.8 mm · Cone ratio: 1:5 · Thread type: MF26x1.5 (fine pitch thread)
250,80 EUR
Explore categories from Tools
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Surface: blackened · Width across flats trigger: 27 mm · Total length: 55 mm · Total length: 75 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Number of components: 1 pcs · Strength class: 8.8
11,60 EUR
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Area of application: (Dis)assembly tool · Surface: galvanized (blue) · Number of components: 1 pcs · Total length: 120 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Diameter: 24 mm · Diameter: 40.3 mm
51,20 EUR
GPO clutch trigger M27x1.25, M20x1 | Sachs 503, 50/2, 50/3, 50/4
Surface: blackened · Width across flats trigger: 27 mm · Total length: 57 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Strength class: 8.8
23,20 EUR
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Surface: anodized · Surface: galvanized (blue) · Height: 16 mm · Manufacturer: swiing® revival parts · Ø inside: 64 mm · Ø outside: 75 mm · Area of application: Special tool · Material: Aluminum · Material: Steel · Thread type: M6x1 (standard thread) · Number of components: 4 pcs · Thread length: 40 mm · Sachs OEM no.: 0276 057 000
34,90 EUR
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs · Total length: 130 mm · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Width across flats: 10 mm · Width across flats: 17 mm
23,20 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
