Hot 
High-end racing crankshaft suitable for manual Puch X30 NS / NL Z50 engines (air cooling).
Attention: Not suitable for Puch X30 Velux engines (blower cooling)!
High-quality and precisely fitting, 942 gram full cheek crankshaft, which has proven itself in various load tests. This was designed for use in engines with a large increase in power.
All balancing holes in the cheeks have been sealed with aluminum inserts for maximum pre-compression.
The solid connecting rod is fitted with a more stable 16 mm connecting rod pin, which is hollow on the inside for better balancing.
In addition, the connecting rod bearings are silver bearings, which have excellent emergency running properties.
| Manufacturer | swiing® ingenious parts |
| Weight | 942 g |
| Material | Steel, Aluminum |
| Cheek type | Full cheeks |
| Crankshaft stroke | 44 mm |
| Connecting rod length center-center | 90 mm |
| Thread type | MF10x1 (fine pitch thread) |
| Total length of crankpin on clutch side | 57 mm |
| Total length crankpin ignition side | 66 mm |
| Ø crank webs | 69.9 mm |
| Ø Connecting rod eye | 15 mm |
| Ø piston pin (B) | 12 mm |
| Ø Bearing seat (clutch side) | 17 mm |
| Ø Bearing seat (ignition side) | 17 mm |
| Dimension needle bearing | 12 / 15 x 14.2 mm (axe 12) |
| Area of application | High End, Tuning, Racing |
| Wide crank webs | 34 mm |
| Length 1st paragraph | 20 mm |
| Length 2nd paragraph | 19 mm |
| Ø 1st step (on the coupling side) | 17 mm |
| Ø 2nd shoulder (on the clutch side) | 15 mm |
| Length of shoulder (ignition side) | 27 mm |
| Puch | Z50 (X30 Sport) |
Accessories & related products
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Number of components: 1 pcs · Diameter: 24 mm · Diameter: 40.3 mm · Total length: 120 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Area of application: (Dis)assembly tool
51,20 EUR
swiing® revival spacer set crankshaft L17 | Puch Z50
Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Ø inside: 17.1 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Ø outside: 23.8 mm · Nominal diameter inside: 17 mm
10,40 EUR
Serrated lock washer M10 galvanized
Material: Steel · Surface: galvanized (blue) · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8 · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm
0,35 EUR
Elring Dirko HT sealing compound black (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Area of application: Chemistry · Color: black · Contents: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm
23,20 EUR
331,43 EUR/l
Explore categories from Engine block
Moped fans also bought
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Number of components: 10 pcs · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Area of application: Standard
23,20 EUR
swiing® revival gearbox cover gasket (old model) | Puch Z50 engine
Thickness: 0.35 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Number of components: 1 pcs · Width: 155 mm · Total length: 166 mm · Number of fixing points: 8 pcs · Color: sand-colored · Puch OEM number: 349.1.10.249.1
4,55 EUR
swiing® revival engine gasket | Puch Z50 engine X30 NS, NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 0.4 mm · Width: 167 mm · Total length: 240 mm · Number of fixing points: 12 pcs · Number of components: 1 pcs · Ø inside: 74 mm · Puch OEM number: 349.1.10.231.1
6,55 EUR
swiing® revival spacer set crankshaft L17 | Puch Z50
Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Ø inside: 17.1 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Ø outside: 23.8 mm · Nominal diameter inside: 17 mm
10,40 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
