Custom-fit copper cylinder head gasket for mopeds, scooters, or small motorcycles equipped with Sachs 503, 502 (Saxonette) automatic engines, as well as manual 50/2, 50/3 (DE), or 50/4 (DE) engines.
The cylinder head gasket fits, for example, the 41 mm GPO cylinders “Pomodoro” and “Divertimento,” as well as the BAD ASS cylinders “Pandora” and “Diablo.”
Copper dissipates heat very effectively and fits snugly against the sealing surfaces. Compared to an aluminum gasket, the copper cylinder head gasket can therefore help maintain a uniform seal even under high thermal stress. Additionally, it better compensates for surface irregularities, as the cylinder head presses slightly into the gasket.
You can find additional cylinder head gaskets in the accessories section.
A sophisticated product from the premium swiing® brand, designed to meet the highest standards.
| Nominal diameter | 41 mm |
| Ø inside | 41.5 mm |
| Thickness | 0.5 mm |
| Manufacturer | swiing® ingenious parts |
| Place of use | Cylinder head |
| Ø cylinder | 41 mm |
| Material | Copper |
| Hole pattern [mm] | 37 x 37 |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 503 - AAL , ABL , 2AL / 2BL |
Accessories & related products
swiing® revival gasket cylinder head 38 mm cylinder | Sachs 503, 502, 50/2, 50/3, 50/4
Nominal diameter: 38 mm · Thickness: 0.2 mm · Manufacturer: swiing® revival parts · Place of use: Cylinder head · Material: Aluminum · Ø cylinder: 38 mm · Hole pattern [mm]: 37 x 37 · Area of application: Standard
5,70 EUR
swiing® ingenious 43 mm cylinder head gasket | Sachs 503, 502, 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Place of use: Cylinder head · Material: Aluminum · Reinforced: No · Ø cylinder: 43 mm · Nominal diameter: 43 mm · Thickness: 0.4 mm · Hole pattern [mm]: 37 x 37 · Ø inside: 43.2 mm
5,70 EUR
swiing® ingenious 41 mm gasket cylinder head | Sachs 503, 502, 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Place of use: Cylinder head · Material: Aluminum · Reinforced: No · Ø cylinder: 41 mm · Nominal diameter: 41 mm · Thickness: 0.4 mm · Hole pattern [mm]: 37 x 37 · Ø inside: 41.3 mm
5,70 EUR
Explore categories from Cylinder
Moped fans also bought
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing type: Shoulder bearing · Stock number: BO15 · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing cage: Brass cage ball-guided · Width: 10 mm · Ø inside: 15 mm · Material: Brass · Material: Steel · Ø outside: 40 mm · Area of application: Standard · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
29,10 EUR
Oil seal NBR 15/30/7 B DUO | Sachs 50/2 / 503 (A1830)
Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: NBR · Ø inside: 15 mm · Temperature resistance (min.): -30 - 100 °C · Ø outside: 30 mm · Width: 7 mm · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
6,30 EUR
Oil seal FPM 15/30/7 BS | Sachs 50/2, 503
Temperature resistance (min.): -30 - 200 °C · Shaft seal type: BS - With sheet metal outer casing / one sealing lip / one dust lip. · Manufacturer: Sachs · Material: FPM / FKM (colloquially known as Viton) · Width: 7 mm · Ø inside: 15 mm · Ø outside: 30 mm · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
9,10 EUR
AKOA 41 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Camouflaged: No · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 57 ccm · Material: Aluminum · Crankshaft stroke: 43 mm · Nominal diameter: 41 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø Inlet inside: 15.8 mm · Ø outlet inside: 20.5 mm · Hole spacing inlet: 32 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Area of application: Tuning · Outlet type: clamped · Decompressor: No
209,90 EUR
AKOA 41 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 41 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
244,90 EUR
Working late? Evening hours on Thursday until 20:00
