Bearing and shaft seal set for Puch mopeds / mopeds with 1-speed E50 engines (old model).
This bearing set can be installed in Puch Maxi S, Puch Maxi N and Puch Supermaxi LG1 cat engines, among others.
All ball bearings are from the quality brand SKF with increased bearing clearance C3.
The shaft seals (colloquially known as oil seals) are made of fluorine rubber and are resistant up to a temperature of 200°C.
Manufactured NBR shaft seals are temperature-resistant up to 100 °C.
FPM or FKM shaft seals (commonly known as Viton) are particularly suitable for racing, as they are designed for higher speeds and can therefore withstand higher temperatures.
Installation positions of the oil seals:
17/40/7 A (one sealing lip, without dust lip): Crankshaft on the ignition side
22/40/7 DUO (two sealing lips): Crankshaft Clutch side
17/40/7 DUO (two sealing lips): Gear pinion shaft
Note: Suitable for crankshafts which have an enlarged oil seal seat on the clutch side and a bearing with a 12 mm inner ring.
Exclusive product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Area of application | Standard |
| Number of components | 7 pcs |
| Puch | E50 |
Ratings
Accessories & related products
GPO gasket set | Puch E50
Manufacturer: GPO · Area of application: Standard · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Decompressor: Yes · Number of components: 7 pcs · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm
11,60 EUR
swiing® revival screw set engine galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
11,60 EUR
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Temperature resistance (min.): -60 - 315 °C · Manufacturer: Elring · Area of application: Chemistry · Color: gray · Material: Silicone · Contents: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm
23,20 EUR
331,43 EUR/l
swiing® revival ball bearing puller L17 / BO15 / E15 / E20 / 6203 / 6202
Manufacturer: swiing® revival parts · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: E20 · Peel-off tray: L17 · Peel-off tray: 6202 · Peel-off tray: 6203 · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Surface: gas nitrided · Number of components: 3 pcs
46,60 EUR
Explore categories from Engine block
Moped fans also bought
GPO gasket set | Puch E50
Manufacturer: GPO · Area of application: Standard · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Decompressor: Yes · Number of components: 7 pcs · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm
11,60 EUR
swiing® revival screw set engine galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
11,60 EUR
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Color: sand-colored · Material: Sealing paper · Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 0.5 mm · Number of components: 1 pcs · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
3,40 EUR
swiing® ingenious crankshaft "High End" | Puch E50
Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Area of application: High End · Area of application: Racing · Area of application: Tuning · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Weight: 968 g · Thread length: 11 mm · Ø piston pin (B): 12 mm · Thread length: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread type: MF10x1 (fine pitch thread) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Number of gears: 1 pcs
159,80 EUR
GPO cylinder stud bolt set special M6x106 mm galvanized | Puch
Diameter: 7 mm · Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Total length: 106 mm · Drive: External hexagon · Thread type: M6x1 (standard thread) · Thread length: 15 mm · Thread length: 19 mm · Width across flats: 10 mm · Strength class: 10 · Strength class: 10.9 · Alternative version of the Puch OEM number: 360.1.10.034.1
23,20 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
