Special stud bolt set (centering sleeves) for Sachs 502, 50/2, 50/3, 50/4, 503, and 504 mopeds and small motorcycles.
The shaft in the center ensures that the cylinder is optimally guided and centered.
Thanks to the small wrench size, the nut can be installed with ease even in hard-to-reach areas at the base of the cylinder.
The increased tensile strength compensates for the difference in thread diameter.
Centering
bolt Length: 27 mm
Shank diameter: 6.1 mm
Thread: M6 / M5
Thread length: 14 / 10 mm
Stud strength class: 12.9
Nuts
: Thread: M5
; Height: 5 mm
; Wrench size: 8 mm; Hex
; Strength class: 10
; Material: Steel, galvanized
Washers
Inner diameter: 5.2 mm
Outer diameter: 12 mm
Height: 1.4 mm
Material: Steel, galvanized
Note: Depending on the cylinder’s manufacturing tolerances, it may be necessary to remove one washer so that the nut can be tightened properly.
A sophisticated product meeting the highest standards of the swiing® quality brand.
| Total length | 27.3 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | burnished, galvanized (blue) |
| Diameter | 6 mm |
| Nominal diameter (thread) | 6 mm, 5 mm |
| Width across flats | 8 mm |
| Strength class | 12.9, 10 |
| Drive | External hexagon |
| Thread type | M6x1 (standard thread), M5x0.8 (standard thread) |
| Thread length | 14 mm, 9.5 mm |
| Universal | |
| Sachs | 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 503 - AAL , ABL , 2AL / 2BL |
Accessories & related products
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Total length: 30 mm · Strength class: 10.9 · Thread length: 12 mm
2,10 EUR
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Contents: 10 ml · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,60 EUR
2.560,00 EUR/l
swiing® revival stud bolt M6x38 inlet/outlet galvanized (10.9 strength)
Total length: 38 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Nominal diameter (thread): 6 mm · Strength class: 10.9 · Thread type: M6x1 (standard thread) · Thread length: 11 mm · Thread length: 19 mm
2,35 EUR
Moped fans also bought
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Area of application: Standard · Number of components: 1 pcs
2,80 EUR
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch · Temperature resistance (min.): -30 - 220 °C
13,40 EUR
29,78 EUR/l
swiing® revival clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Manufacturer: swiing® revival parts · Material: Composite materials · Material: Steel · Ø outside: 93.7 mm · Ø inside: 29.7 mm · Ø inside: 36 mm · Recording type: Interlocking · Number of slats: 2 pcs · Thickness: 3.3 mm · Area of application: Standard · Pony OEM number: A3887 · Sachs OEM no.: 0659 010 006
30,90 EUR
Hot
swiing® revival carburetor 13 mm Bing SSB 1/13/4
Total length: 132 mm · Width: 87 mm · Height: 85 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Standard · Area of application: Tuning · Carburetor type: SSB · Nominal diameter: 13 mm · Mounting type: Flange · Ø fuel hose connection: 6 mm · Nozzle size: 75 · Camouflaged: No · Mixed oil connection: No · Hole spacing inlet: 31 mm · Vacuum connection: No · Choke control: without choke
148,10 EUR
Hot
swiing® ingenious 41 mm cylinder kit Racing fan-cooled | Sachs 50/2 (CH)
Nominal diameter: 41 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.3 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 37 x 37 · Camouflaged: No · Area of application: Racing
256,60 EUR
Not in stock
Working late? Evening hours on Thursday until 20:00
