Special Venturi pipe made of red anodized aluminium for your moped / moped with Sachs 50/2, 50/3 & 50/4 engine and Ø 32 mm flame tube.
The Venturi pipe is specially developed for the swiing 38 mm and 41 mm aluminium cylinders and helps the exhaust gas to escape more slowly into the exhaust to develop a greater suction. With the insert you achieve more power at low engine speeds.
For installation, the threaded ring may have to be changed from M35 to M40 in advance so that a 32 mm manifold can be installed. In addition, the special, extended exhaust nut should be used so that the flame tube can be screwed on correctly. Depending on the temperature, the weld seam on the inside may need to be ground down slightly.
Ø outer: 29 mm
Ø flange: 38 mm
Ø inlet: 22.5
Ø outlet: 26 mm
Length: 40 mm
Material: aluminium, anodized
You can find the matching flame tube, the exhaust nut, the threaded ring and a suitable exhaust in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Color | red |
| Material | Aluminum |
| Surface | anodized |
| Ø inside | 22.5 mm, 26 mm |
| Ø outside | 29 mm, 38 mm |
| Total length | 40 mm |
| Sachs | 50/2 50/3 50/4 |
Ratings
Accessories & related products
Hot 
swiing® ingenious cigar Ø 32 / 70 mm chrome (reso exhaust)
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Total length: 730 mm · Color: Chrome · Ø Silencer: 70 mm · Ø Internal connection: 32 mm · Exhaust type: Cigar · Mounting type: Screwed clamp
116,60 EUR
Not in stock
swiing® ingenious cigar Ø 32 / 70 mm black (reso exhaust)
Manufacturer: swiing® ingenious parts · Mounting type: Screwed clamp · Material: Steel · Surface: varnished · Color: black · Ø outside: 70 mm · Total length: 730 mm · Ø Silencer: 70 mm · Ø Internal connection: 32 mm · Exhaust type: Cigar
116,60 EUR
swiing® ingenious hook wrench M40 exhaust nut | Sachs 50/2
Manufacturer: swiing® ingenious parts · Weight: 300 g · Material: Rubber · Material: Steel · Surface: galvanized (blue) · Ø inside: 33 mm · Ø outside: 46 mm · Height: 5 mm · Total length: 280 mm · Width: 67 mm · Area of application: Workshop accessories · Number of components: 1 pcs
29,10 EUR
Hot
swiing® ingenious flute Ø 32 / 70 mm chrome (reso exhaust)
Manufacturer: swiing® ingenious parts · Material: Steel · Color: Chrome · Surface: chrome-plated · Total length: 785 mm · Ø outside: 35 mm · Ø Silencer: 70 mm · Mounting type: Screwed clamp · Exhaust type: Flute · Ø Internal connection: 32 mm · Flame tube attachment: Plug connection clamped
128,30 EUR
Hot
swiing® ingenious flute Ø 32 / 70 mm black (reso exhaust)
Manufacturer: swiing® ingenious parts · Mounting type: Screwed clamp · Material: Steel · Surface: varnished · Color: black · Total length: 780 mm · Ø Silencer: 70 mm · Ø Internal connection: 32 mm · Exhaust type: Flute · Flame tube attachment: Plug connection clamped
128,30 EUR
swiing® ingenious exhaust clamp 32 mm heat-resistant
Manufacturer: swiing® ingenious parts · Mounting type: Nuts & bolts · Material: FPM / FKM (colloquially known as Viton) · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø inside: 29 - 33 mm · Total length: 40 mm · Width: 40 mm
25,60 EUR
Explore categories from Exhaust system
Moped fans also bought
Nut M12x1 x 10 SW19 Wheel nut Inox
Material: Chrome steel (colloquially known as stainless steel) · Area of application: Standard · Nut type: Hexagon nut 1D · Drive: External hexagon · Height: 10 mm · Width across flats: 19 mm · Thread type: MF12x1 (fine pitch thread) · Strength class: A2-70
4,55 EUR
Not so nice 
Exhaust clamp 32 mm with rubber
Nominal diameter: 32 mm · Material: Rubber · Material: Silicone · Surface: galvanized (blue) · Color: silver · Ø inside: 35 mm · Thickness: 3.5 mm · Width: 40 mm · Number of fixing points: 1 pcs · Ø mounting hole: 6.4 mm · Clamping diameter: 32 - 35 mm
16,20 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
