Brake lever for the front wheel on your Piaggio SI PTT moped / moped.
Brake cam mount: 12.5 x 8.2 mm
Ø bore: 11.2 mm
Crushing: 4 mm
Total length: 72 mm
Material thickness: 4 mm
Material: steel, blue galvanized
Note: The two-sided mount of this brake lever is larger than on all other models of the Piaggio Ciao, Bravo, Boxer and the standard versions of the Piaggio Si Europe and Montecarlo.
Only some late Cilo and Pony Cross models also have the larger mount - here the lever fits, but differs slightly in its curvature.
The corresponding brake cam, brake cable and cable clamps can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Thickness | 4 mm |
| Material | Steel |
| Surface | galvanized (blue) |
| Place of use | Brake anchor plate |
| Total length | 72 mm |
| Color | silver |
| Height | 8 mm |
| Pony / Cilo (Beta 521 & 512) | Pony Cross 521 (frame) |
| Piaggio | Si |
Accessories & related products
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Nipple length: 10 mm · Number of components: 1 pcs
2,80 EUR
swiing® revival clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10.9 mm · Total length: 21 mm · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Screw head: Hexagon · Thread length: 9.5 mm · Thread type: M7x1 (standard thread) · Width across flats SW: 11 mm · Width across flats SW: 14 mm · Number of components: 3 pcs · Alternative version of the Piaggio OEM number: 27348
6,30 EUR
swiing® ingenious clamping screw front brake reinforced M8 | Piaggio Ciao, SI, Bravo, Boxer
Drive: External hexagon · Manufacturer: swiing® ingenious parts · Total length: 21 mm · Material: Steel · Surface: galvanized (blue) · Number of components: 3 pcs · Ø Cable bushing: 2.1 mm · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Ø shaft: 10.9 mm · Thread length: 9.5 mm · Width across flats SW: 13 mm · Width across flats SW: 14 mm · Alternative version of the Piaggio OEM number: 154533
8,60 EUR
Moped fans also bought
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Nipple length: 10 mm · Number of components: 1 pcs
2,80 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs
2,30 EUR
Hot 
swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo
Manufacturer: SKF · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Ø inside: 11.25 mm · Ø inside: 15 mm · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm · Total length: 53.5 mm · Width: 9 mm · Ball bearing closed: Yes
34,30 EUR
Clamping screw front brake original | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Material: Steel · Surface: galvanized (blue) · Thread type: M7x1 (standard thread) · Number of components: 7 pcs · Drive: External hexagon · Screw head: Hexagon · Total length: 20.5 mm · Thread length: 13.5 mm · Width across flats SW: 11 mm · Area of application: Original · Piaggio OEM number: 154533
19,60 EUR
Collection only possible with online purchase and appointment.
