
Outer ring 21x28x6.1 mm for the right-side roller bearing on the main shaft, compatible with your moped equipped with a Sachs 502 (Saxonette) automatic engine as well as manual Sachs 50/2 and 503 engines.
The bearing ring serves as a precise running surface for the cylindrical rollers of the roller bearing and is suitable for professional engine overhaul. The hardened and ground surface ensures smooth operation of the bearing rollers and a precise fit on the right side of the shaft.
You can find matching bearing rollers, spacer washers, and other parts for engine overhauls in the accessories section.
A nostalgic product meeting the highest standards from the swiing® quality brand.
Original Pony part number: A1146
Original Sachs part number: 0232 012 000
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | hardened & ground |
| Ø inside | 21 mm |
| Ø outside | 28 mm |
| Width | 6.1 mm |
| Pony OEM number | A1146 |
| Sachs OEM no. | 0232 012 000 |
| Sachs | 502 (Saxonette) - AML 50/2 - ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 503 - AAL , ABL , 2AL / 2BL , AB , AC , ADV |
Accessories & related products
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 100 °C · Manufacturer: Sachs · Material: NBR · Place of use: Pinion shaft · Width: 3.5 mm · Ø inside: 14.96 mm · Ø outside: 31.5 mm · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
8,75 EUR
swiing® revival pinion shaft | Sachs 503 2AL, 2BL (A1322)
Ø outside: 15.4 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Toothing type: straight toothed · Number of teeth: 4 pcs · Recording type: Ø15 x SW12 · Ø inside: 12.9 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 91.5 mm
86,20 EUR
swiing® revival pinion shaft | Sachs 50/2 manual (A1291)
Ø outside: 15.4 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Toothing type: straight toothed · Number of teeth: 4 pcs · Recording type: Ø15 x SW12 · Ø inside: 13 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 102.6 mm · Pony OEM number: A1291 · Sachs OEM no.: 0237 014 002
89,70 EUR
swiing® ingenious ball bearing pinion shaft 15.5/31.5/8 | Sachs 502 AML, 50/2 ML, 50/3, 50/4
Bearing type: Deep groove ball bearing · Ø inside: 15.5 mm · Ø outside: 31.5 mm · Width: 8 mm · Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS1 - NBR contact seal on both sides · Bearing cage: Sheet steel cage · Material: Steel
32,60 EUR
Explore categories from Gearbox & housing (motor)
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm
2,80 EUR
swiing® revival locking plate drive wheel Inox | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A1717)
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Ø inside: 10.2 mm · Ø outside: 23 mm · Number of lobes: 1 pcs · Thickness: 0.5 mm · Pony OEM number: A1717 · Sachs OEM no.: A1717 · Sachs OEM no.: 0246 049 000
8,05 EUR
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Material: Steel · Ø outside: 35 mm · Ø inside: 15 mm · Stock number: E15 · Width: 8 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Area of application: High End · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
58,20 EUR
swiing® revival thrust washer 13.5/27.8/1 roller bearing right | Sachs 502, 50/2, 503 (A1548)
Ø inside: 13.5 mm · Ø outside: 27.8 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Thickness: 1 mm · Pony OEM number: A1547 · Pony OEM number: A1548 · Sachs OEM no.: 0244 039 000 · Sachs OEM no.: 3510 004 004
9,20 EUR
swiing® revival thrust washer 16.6/31.2/1 pinion shaft | Sachs 502, 50/2, 50/3, 50/4, 503 (A1570)
Ø inside: 16.6 mm · Ø outside: 31.2 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Thickness: 1 mm · Pony OEM number: A1570 · Sachs OEM no.: 0244 078 000
8,05 EUR








