Distance shim set for adjusting the crankshaft of the 2-speed manual Z50 engine of Puch X30 Sport NS / NL and Velux mopeds.
The set contains 5 shims in the following dimensions:
1 pc. 17 x 0.1 mm
1 pc. 17 x 0.15 mm
1 pc. 17 x 0.2 mm
1 pc. 17 x 0.3 mm
1 pc. 17 x 0.5 mm
This set is an absolute must for every engine overhaul!
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | blank / oiled |
| Ø inside | 17.1 mm |
| Nominal diameter inside | 17 mm |
| Thickness | 0.1 mm, 0.15 mm, 0.2 mm, 0.25 mm, 0.3 mm |
| Ø outside | 23.8 mm |
| Puch | Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Ratings
Explore categories from Gearbox & housing (motor)
Moped fans also bought
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Number of components: 10 pcs · Manufacturer: swiing® revival parts · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 22 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm
22,60 EUR
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Gearbox type: Foot control · Gearbox type: Manual gearshift · Contents: 450 ml · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
11,20 EUR
24,89 EUR/l
swiing® ingenious crankshaft "High End" | Puch X30 NS / NL (Z50)
Manufacturer: swiing® ingenious parts · Weight: 954 g · Material: Aluminum · Cheek type: Full cheeks · Material: Steel · Thread type: MF10x1 (fine pitch thread) · Area of application: Racing · Area of application: Tuning · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Number of gears: 2 pcs · Total length of crankpin on clutch side: 57 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 70 mm · Thread length: 10 mm · Thread length: 13 mm · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 20 mm · Length 2nd paragraph: 19 mm · Ø 1st step (on the coupling side): 17 mm · Ø 2nd shoulder (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm
187,00 EUR
swiing® ingenious clutch spring reinforced +20% | Puch Z50
Spring design: Pressure spring · Ø wire: 4.6 mm · Number of components: 1 pcs · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: blue · Ø inside: 30 mm · Total length: 20.5 mm · Ø outside: 39 mm · Area of application: Tuning
27,10 EUR
Collection only possible with online purchase and appointment.
