Wheel bearing shell set, Ø 32 mm, with retaining ring for mounting the wheel hub on your moped, scooter, or small motorcycle.
The bearing cups hold the ball bearings and are required to assemble the complete wheel axle.
The package includes wheel bearing cups and dust rings.
Note: The dust ring with felt is used on the brake side.
You can find matching ball bearings, speedometer drives, and bearing grease in the accessories section.
| Ø inside | 28 mm |
| Ø outside | 32 mm |
| Material | Steel |
| Height | 14 mm |
| Ø bore | 13.8 mm |
| Ø Bundle | 37.5 mm |
Accessories & related products
Transval speedo drive 17" with lugs 11 mm axle (for VDO speedo cable) | Puch & Sachs
Ø outside: 41 mm · Manufacturer: Transval · Ø axle: 11 mm · Material: Aluminum · Place of use: left · Place of use: right · Thread type: MF10x1 (fine pitch thread) · Wheel size: 17 " · 4-edge speedometer cable: 1.8 mm · 4-edge speedometer cable: 2.6 mm · Ø mounting hole: 11 mm
40,70 EUR
Transval speedo drive 17" with 12 mm axle | Puch Maxi S / N, X30 Sport NS / NL, NG-2AH, X30 Velux
Ø outside: 41 mm · Manufacturer: Transval · Ø axle: 12 mm · Material: Aluminum · Place of use: left · Place of use: right · Thread type: MF10x1 (fine pitch thread) · Wheel size: 17 " · 4-edge speedometer cable: 2.6 mm · Ø mounting hole: 12 mm
41,90 EUR
GPO speedo drive 17" with lugs 11 mm axle (for VDO speedo cable) | Puch & Sachs
Manufacturer: GPO · Material: Aluminum · Place of use: left · Place of use: right · Wheel size: 17 " · 4-edge speedometer cable: 1.8 mm · 4-edge speedometer cable: 2.6 mm · Ø outside: 41 mm · Ø mounting hole: 11 mm · Ø axle: 11 mm · Thread type: MF10x1 (fine pitch thread)
32,60 EUR
GPO speedo drive 17" with lugs 12 mm axle | Puch Maxi S / N, X30 Sport NS / NL, NG-2AH, X30 Velux
Manufacturer: GPO · Material: Aluminum · Place of use: left · Place of use: right · Wheel size: 17 " · 4-edge speedometer cable: 1.8 mm · 4-edge speedometer cable: 2.6 mm · Ø outside: 41 mm · Ø mounting hole: 12 mm · Ø axle: 12 mm · Thread type: MF10x1 (fine pitch thread)
32,60 EUR
Explore categories from Hub & axle
Moped fans also bought
Hot 
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears
2,80 EUR
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain type: 415H · Chain lock type: Spring lock · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1448 mm · Ø bore: 4.05 mm · Ø Pin: 4 mm
22,10 EUR
NTN 6201 2RS ball bearing 12/32/10
Bearing type: Deep groove ball bearing · Bearing cage: Sheet steel cage ball-guided · Ø inside: 12 mm · Stock number: 6201 · Ø outside: 32 mm · Inner ring width: 10 mm · Manufacturer: NTN · Ball bearing closed: Yes · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Width: 10 mm
11,60 EUR
Bearing cone M11x1 mm
Ø outside: 19 mm · Height: 12 mm · Material: Steel · Surface: gas nitrided · Color: graphite colors · Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Width across flats: 15 mm
9,20 EUR
swiing® revival wheel axle set V905 wheel hub front | Sachs
Diameter: 11 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Width across flats: 17 mm · Ø shaft: 11 mm · Total length: 145 mm · Ball bearing closed: No
40,70 EUR
Not in stock
Working late? Evening hours on Thursday until 20:00
