Adjustable oil pressure shock absorbers in black with chrome-plated coil spring for your moped, moped and small motorcycle.
The hardness or preload of the springs can be adjusted in five stages thanks to the special spring mount. The rear springs should always be secured with large washers to prevent the bearing bushes from shifting when lateral forces occur.
Length (mount – mount): 300 mm
Ø outer spiral spring: 52 mm
Ø spars: 32 mm
Ø bushings for fastening: 10 mm / 12 mm
Color: black / chrome
The scope of delivery corresponds to one pair.
You can find rear springs from other manufacturers as well as the washers and fastening material in the accessories section.
Quality product from the manufacturer YSS.
| Manufacturer | YSS |
| Hole spacing | 300 mm |
| Material | Steel |
| Surface | varnished, chrome-plated |
| Color | black, Chrome |
| Damping type | Hydraulic (oil) |
| Adjustable | Yes |
| Ø spars | 32 mm |
| Mounting type | Nuts & bolts |
| Ø Fastening inside | 10 mm, 12 mm |
| Ø outside | 52 mm |
| Total length | 330 mm |
| Number of fixing points | 2 pcs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,60 EUR
2.560,00 EUR/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Hole spacing: 330 mm · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Color: black · Adjustable: Yes · Ø spars: 32 mm · Mounting type: Nuts & bolts · Ø Fastening inside: 10 mm · Ø outside: 52 mm · Total length: 335 mm · Number of fixing points: 2 pcs
151,60 EUR
IMCA shock absorber 30 cm chrome / black
Manufacturer: IMCA · Hole spacing: 300 mm · Material: Steel · Surface: chrome-plated · Surface: varnished · Color: Chrome · Damping type: Spring · Color: black · Adjustable: Yes · Ø spars: 28 mm · Mounting type: Nuts & bolts · Ø Fastening inside: 10 mm · Ø outside: 45 mm · Total length: 330 mm · Number of fixing points: 2 pcs
69,90 EUR
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs
13,90 EUR
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs
20,90 EUR
Explore categories from Shock absorber & swingarm
Moped fans also bought
Hot 
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.2 mm · Ø Pin: 4.15 mm
39,60 EUR
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
11,60 EUR
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Ø cylinder: 45 mm · Width: 125 mm · Height: 55 mm · Candle thread: short · Total length: 135 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes
38,40 EUR
Karcoma fuel filter 24 mm plastic / paper
Manufacturer: Karcoma · Material: Paper · Material: Plastic · Color: transparent · Color: yellow · Filter type: Filter paper · demountable: No · Ø inside: 4.7 mm · Ø outside: 24 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7.3 mm · Total length: 35 mm · Total length: 60 mm
15,80 EUR
Hot
swiing® revival Pedal Crank Set, Chrome | Puch
Manufacturer: swiing® revival parts · Wide intake: 28 mm · Material: Steel · Surface: chrome-plated · Color: Chrome · Crank length (center-center): 156 mm · Ø Pedal wedge: 9.5 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm · Ø Pedal axle: 16 mm · Thread type: FG14.3 (9/16" 20G) · Total length: 180 mm
87,40 EUR
Working late? Evening hours on Thursday until 20:00
