Black, front mudguard made of stainless steel for your Puch X30 NS, NL, NG-2AH, N-2AH, Puch X30-A, Puch Sprinter and Puch Supermaxi LG1 / LG2 moped / moped.
Since the front mudguard is folded on both sides, there are no sharp edges, which significantly reduces the risk of injury. Furthermore, it is still possible to use an edge protector or splash guard flap. Corresponding holes must still be drilled if required.
All original holes are provided for mounting the side and lower mudguard struts.
To mount cable guides, holes are also already incorporated on both sides of the mudguard.
Note: These are B-grade goods. Unfortunately, the mudguards were insufficiently protected during transportation. Therefore, scratches may be present. The black color should therefore be regarded as a primer rather than a final coat of paint. The folded ends may also have been finished a little more beautifully.
Further parts for your wheel fairing, such as paint polish or fastening material, can be found in the accessories section.
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | varnished |
| Color | black |
| Wheel size | 17 " |
| Folding the ends | closed folded |
| Shape of the mudguard | round |
| Total length over ends | 560 mm |
| Scope | 700 mm |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 180 mm |
| Mounting type | Nuts & bolts |
| Puch |
Ratings
Accessories & related products
swiing® revival 17" front fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Supermaxi LG1
Manufacturer: swiing® revival parts · Mounting type: Nuts & bolts · Color: Chrome · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Wheel size: 17 " · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm
67,90 EUR
swiing® revival 17" front fender "Retro" Inox black | Puch X30 NS, NL, NG-2AH, N-2AH, LG1/LG2
Manufacturer: swiing® revival parts · Mounting type: Nuts & bolts · Color: black · Material: Chrome steel (colloquially known as stainless steel) · Surface: varnished · Wheel size: 17 " · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm
67,90 EUR
GPO mudguard strut front 17" black
Manufacturer: GPO · Surface: varnished · Color: black · Material: Steel · Wheel size: 17 " · Distance mudguard - center hole: 300 mm · Number of fixing points: 4 pcs · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm · Total length: 305 mm · Mounting type: Nuts & bolts
16,90 EUR
swiing® revival mudguard arch 17" front black
Manufacturer: swiing® revival parts · Mounting type: Nuts & bolts · Color: black · Outer width: 130 mm · Material: Steel · Surface: varnished · Wheel size: 17 " · Total length: 270 mm · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Wide intake: 115 mm · Number of fixing points: 6 pcs · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.3 mm · Hole spacing: 35 mm
22,60 EUR
Explore categories from Mudguard
Moped fans also bought
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Surface: galvanized (blue) · Color: black · Color: silver · Material: Plastic · Material: Steel · Number of teeth: 10 pcs · Total length: 175 mm · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs · Thread type: M6x1 (standard thread)
11,20 EUR
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Surface: powder-coated · Color: black · Material: Steel · Ø inside: 94 mm · Number of teeth: 45 pcs · Number of fixing points: 6 pcs · Thickness: 4.5 mm · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Ø bolt circle: 105.5 mm
22,60 EUR
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Surface: galvanized (blue) · Material: Steel · Area of application: Standard
2,75 EUR
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Color: silver · Material: Plastic · Material: Steel · Thread type: M5x0.8 (standard thread) · Surface: galvanized (blue) · Surface: raw · Total length: 47 mm · Total length: 60 mm · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm
14,60 EUR
Not so nice 
Luggage carrier black | Puch Maxi S
Mounting type: Nuts & bolts · Color: black · Material: Steel · Surface: varnished · Wheel size: 17 " · Total length: 425 mm · Number of fixing points: 4 pcs · Ø mounting hole: 8.2 mm · Ø mounting hole: 8.8 mm · Hole spacing: 29 mm · Width: 168 mm · Height: 32 mm
22,60 EUR
GPO side bars black matt (1A quality) | Puch Maxi S
Manufacturer: GPO · Surface: varnished · Color: black · Material: Steel · Total length: 420 mm · Number of fixing points: 4 pcs · Width: 170 mm · Ø mounting hole: 8.1 mm · Height: 35 mm · Hole spacing: 410 mm · Ø outside: 12.5 mm · Mounting type: Screws
33,90 EUR
GPO mudguard strut front 17" black
Manufacturer: GPO · Surface: varnished · Color: black · Material: Steel · Wheel size: 17 " · Distance mudguard - center hole: 300 mm · Number of fixing points: 4 pcs · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm · Total length: 305 mm · Mounting type: Nuts & bolts
16,90 EUR
swiing® revival mudguard arch 17" front black
Manufacturer: swiing® revival parts · Mounting type: Nuts & bolts · Color: black · Outer width: 130 mm · Material: Steel · Surface: varnished · Wheel size: 17 " · Total length: 270 mm · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Wide intake: 115 mm · Number of fixing points: 6 pcs · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.3 mm · Hole spacing: 35 mm
22,60 EUR
Collection only possible with online purchase and appointment.
