Carbon look air filter suitable for your Puch Maxi S / N moped / moped
.The air filter box is supplied assembled and is already equipped with several layers of fine metal sieves. The dust filter can be opened manually if required, for example to install an alternative air filter insert.
Notes:
From the factory, a joint with silicone sealant was created along the seam of original air filters after the two housing parts were joined to minimize the risk of air leakage. We recommend that this procedure is also used for this air filter.
The clamping bracket for the rear brake cable is larger than usual, which means that only Bowden cables with a diameter of 6 mm are held.
| Color | black |
| Material | Plastic |
| Ø Internal connection | 20 mm |
| Puch | E50 |
Ratings
Accessories & related products
Elring Dirko HT sealing compound black (silicone) 70 ml permanently elastic up to 315°C
Temperature resistance (min.): -60 - 315 °C · Manufacturer: Elring · Material: Silicone · Contents: 70 ml · Color: black · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm · Area of application: Chemistry
23,20 EUR
Not in stock
331,43 EUR/l
Explore categories from Carburetor & intake system
Moped fans also bought
Not so nice 
Chrome luggage rack | Puch Maxi S
Surface: chrome-plated · Color: Chrome · Total length: 425 mm · Width: 168 mm · Height: 32.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Hole spacing: 29 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 9 mm · Material: Steel · Wheel size: 17 "
23,20 EUR
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Surface: galvanized (blue) · Nipple shape: Cylinder · Ø Stranded wire: 1.25 mm · Ø nipple: 3 mm · Cable length: 2200 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Number of components: 1 pcs
2,80 EUR
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Surface: galvanized (blue) · Nipple shape: Pears · Ø Stranded wire: 1.8 mm · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Cable length: 2200 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Number of components: 1 pcs
2,80 EUR
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Surface: galvanized (blue) · Nipple shape: Barrel (transverse) · Ø Stranded wire: 1.5 mm · Ø nipple: 8 mm · Cable length: 1600 mm · Nipple length: 12 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Number of components: 1 pcs
2,80 EUR
swiing® revival seal Float SRE, SRC, SRF, SRA
Surface: blank · Thickness: 1.5 mm · Manufacturer: swiing® revival parts · Ø inside: 41 mm · Ø outside: 45 mm · Component group Carburetor: Sealing, revising · Material: Sealing paper · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
3,25 EUR
Hot
swiing® revival side protection screw set black | Puch Maxi S
Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
15,10 EUR
Buzzetti chain tensioner (1A quality) | Puch Maxi N
Surface: galvanized (blue) · Color: black · Color: silver · Total length: 175 mm · Manufacturer: Buzzetti · Number of fixing points: 1 pcs · Material: Plastic · Material: Steel · Thread type: M6x1 (standard thread) · Number of teeth: 10 pcs · Ø outside sprocket: 36 mm
29,10 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
