Original reproduction air filter for your Puch Maxi S / N moped / moped with standard Bing or swiing® SRE carburetor.
The complete air filter box is supplied pre-assembled. As usual from the factory, it has already been carefully sealed by hand with a silicone joint around the seam to minimize the risk of air leakage and make it easier to adjust the carburettor.
The complete air filter set includes the two housings, the mounting brackets, the air filter hose, the two air filter plugs and the original filter screen installed in the air filter.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Puch spare part number: 349.1.15.070.0, 349.3.15.070.0, 349.6.15.070.0
| Manufacturer | GPO |
| Color | black |
| Filter type | Standard sieve |
| Mounting type | Plug connection clamped |
| Ø Internal connection | 20 mm |
| Area of application | Original, Standard |
| Puch | E50 |
Accessories & related products
Elring Dirko HT sealing compound black (silicone) 70 ml permanently elastic up to 315°C
Temperature resistance (min.): -60 - 315 °C · Manufacturer: Elring · Contents: 70 ml · Color: black · Material: Silicone · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm · Area of application: Chemistry
23,20 EUR
331,43 EUR/l
swiing® ingenious 17 mm carburetor set camouflaged | Puch E50
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Nozzle size: 74 · Ø Air filter connection: 27.5 mm · Hole spacing inlet: 38 mm · Mounting type: Plug connection clamped · Mixed oil connection: No · Choke control: Hand choke · Area of application: Racing · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Clamping screw torque (max.): 4 N/m
209,90 EUR
Explore categories from Carburetor & intake system
Moped fans also bought
Hot 
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Surface: sandblasted · Material: Aluminum · Ø cylinder: 38 mm · Total length: 135 mm · Height: 55 mm · Candle thread: short · Width: 125 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Area of application: Standard · Decompressor: No
38,40 EUR
Exhaust 22 mm 2-piece replica (with number) | Puch
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Total length: 920 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Color: Chrome · Ø outside: 58 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Flame tube attachment: Flange · Number of fixing points: 4 pcs
75,70 EUR
Hot
swiing® revival 12 mm carburetor "original" | Puch
Nominal diameter: 12 mm · Manufacturer: swiing® revival parts · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: gray · Material: Aluminum · Carburetor type: SRE · Nozzle size: 52 · Ø Inside entrance: 12 mm · Total length: 65 mm · Ø Output inside: 12 mm · Height: 108 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Standard · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
81,60 EUR
swiing® revival 12 mm intake manifold | Puch E50
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Aluminum · Ø inside: 12 mm · Hole spacing inlet: 38 mm · Mounting type: Screws · Total height: 53 mm · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Ø External connection: 20 mm · Total length: 45.5 mm · Area of application: Original
40,70 EUR
Hot
swiing® revival 38 mm cylinder kit 1.6 hp CH12 "original" | Puch
Nominal diameter: 38 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Area of application: Standard · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 50 ccm · Ø cylinder neck: 48 mm · Ø outlet inside: 19 mm · Ø Inlet inside: 9 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes · Alternative version of the Puch OEM number: 349.7.10.105.0
151,60 EUR
Hot
swiing® revival nozzle set M3.5 (50 - 60) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 11 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread)
25,60 EUR
Working late? Evening hours on Thursday until 20:00
