High-quality Streetpower racing muffler for your Puch Maxi N moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Manufacturer | AKOA |
| Material | Steel |
| Surface | blank |
| Total length | 940 mm |
| Ø Silencer | 60 mm |
| Ø Flame tube outside | 30 mm |
| Ø Internal connection | 28 mm |
| Exhaust type | Cone / double cone |
| Mounting type | Nuts |
| Number of fixing points | 3 pcs |
| Puch | E50 |
Accessories & related products
Simonini exhaust aluminum | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Mounting type: Welded lug · Ø Silencer: 60 mm · Ø Internal connection: 23 mm · Total length: 830 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Ø outside: 95 mm · Flame tube attachment: Flange
215,80 EUR
HOMOET Exhaust "P6 Special" 28 mm polished | Puch Maxi, X30
Manufacturer: HOMOET · Material: Steel · Surface: blank · Mounting type: Welded lug · Ø Silencer: 50 mm · Ø Internal connection: 24 mm · Total length: 935 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Ø outside: 88 mm · Flame tube attachment: Flange
344,10 EUR
Hot 
HOMOET "P6" Exhaust, 28 mm, Polished | Puch Maxi, X30
Manufacturer: HOMOET · Material: Steel · Color: gray · Surface: raw · Surface: varnished · Mounting type: Tab · Ø Silencer: 50 mm · Total length: 900 mm · Number of fixing points: 2 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Ø outside: 88 mm · Flame tube attachment: Stud bolts & nuts
332,40 EUR
Not in stock
AKOA exhaust "Streetpower" | Puch Maxi S
Manufacturer: AKOA · Material: Steel · Surface: blank · Mounting type: Nuts · Ø Silencer: 60 mm · Ø Internal connection: 28 mm · Total length: 940 mm · Number of fixing points: 3 pcs · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone
396,60 EUR
Not in stock
Explore categories from Exhaust system
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Number of components: 3 pcs · Color: blue · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Ø wire: 1.7 mm · Total length: 28 mm
20,90 EUR
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Area of application: Standard · Nipple length: 5 mm · Number of components: 1 pcs
2,80 EUR
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø nipple: 8 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Cable length: 1600 mm · Nipple length: 12 mm · Area of application: Standard · Number of components: 1 pcs
2,80 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm · Number of components: 2 pcs
2,35 EUR
GPO 85° Carburetor Elbow M6x0.75
Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Thread type: MF6x0.75 (fine pitch thread) · Total length: 45.5 mm · Total length: 53.5 mm · Internal thread: M5x0.8 (standard thread) · Height: 30 mm · Angle: 85 ° · Ø outside: 6 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
6,90 EUR
Polini CP 21 mm carburetor (hand choke) rubber flange
Nominal diameter: 21 mm · Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Carburetor type: CP · Width: 66 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Rubber sleeve · Height: 132 mm · Nozzle size: 100 · Ø Inside entrance: 42 mm · Total length: 71 mm · Ø Output inside: 22.5 mm · Ø Air filter connection: 47 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle block: 35-12 · Camouflaged: No · Size of secondary nozzle: 40
163,30 EUR
Not in stock
Polini 43.5 mm cylinder kit reed valve with head | Puch
Nominal diameter: 43.5 mm · Manufacturer: Polini · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Crankshaft stroke: 43 mm · Displacement: 65 ccm · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Ø cylinder neck: 48 mm · Ø outlet inside: 22 mm · Ø piston pin (B): 12 mm · Inlet window: 26 x 21 mm · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Camouflaged: No
466,70 EUR
Working late? Evening hours on Thursday until 20:00
