Strengthened clutch springs to fit the clutch of your Puch moped / moped with E50 engine.
These tuning springs are 20 % harder than the original springs, making them ideal for use in moderately tuned engines.
With tuned engines, the clutch often engages too early when the engine is not yet up to speed. With the tuning springs, the centrifugal clutch engages later and the extra power is optimally transferred to the rear wheel.
The scope of delivery includes 3 pieces.
| Spring design | Pressure spring |
| Total length | 28 mm |
| Ø inside | 4.8 mm |
| Ø outside | 8.3 mm |
| Ø wire | 1.7 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Spring steel |
| Surface | coated |
| Color | blue |
| Number of components | 3 pcs |
| Area of application | Tuning |
| Puch | E50 |
Accessories & related products
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 0.35 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Number of fixing points: 4 pcs · Puch OEM number: 349.1.10.349.1
2,80 EUR
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Total length: 26.6 mm · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Ø wire: 2 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: red · Number of components: 3 pcs · Area of application: Tuning
20,90 EUR
swiing® ingenious clutch springs reinforced (+60%) | Puch E50
Spring design: Pressure spring · Ø wire: 2.05 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: yellow · Number of components: 3 pcs · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Total length: 26.9 mm · Area of application: Tuning
20,90 EUR
Explore categories from Clutch
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Thickness: 20.9 mm · Manufacturer: GPO · Material: Aluminum · Material: Steel · Material addition: Composite materials · Area of application: Original · Area of application: Standard · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs
58,20 EUR
swiing® revival nut / spring washer clutch E50 | Puch Maxi
Height: 8 mm · Drive: External hexagon · Width across flats: 17 mm · Manufacturer: swiing® revival parts · Thread type: MF10x1 (fine pitch thread) · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Nominal diameter (thread): 10 mm
4,55 EUR
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 0.5 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
3,40 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 1 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
4,55 EUR
Hot 
swiing® ingenious crankshaft "High End" with mounted bearings | Puch E50
Manufacturer: swiing® ingenious parts · Weight: 968 g · Thread type: MF10x1 (fine pitch thread) · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Area of application: High End · Area of application: Racing · Area of application: Tuning · Connecting rod length center-center: 90 mm · Crankshaft stroke: 43 mm · Number of gears: 1 pcs · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 11 mm · Thread length: 15 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm
209,90 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
