19 mm tuning intake manifold for Puch X30 Sport mopeds / mopeds with Z50 engine and Puch Maxi models which have an E50 engine installed.
The CNC-milled intake manifold is designed for Dell'Orto PHBG carburettors and has a round opening on the cylinder side.
On the Puch X30 it is still possible to fit the original side skirts, but it is not possible to operate the hand choke or fit an air filter. Cable chokes and replicas of the carburetor with service hatch at the bottom cannot be fitted.
| Manufacturer | AKOA |
| Camouflaged | No |
| Material | Aluminum |
| Total height | 68 mm |
| Ø External connection | 24 mm |
| Ø inside | 19 mm |
| Number of fixing points | 2 pcs |
| Mounting type | Nuts |
| Height flange center hole | 57 mm |
| Hole spacing inlet | 38 mm |
| Area of application | Tuning |
| Puch | E50 Z50 (X30 Sport) |
Ratings
Accessories & related products
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: PHBG CS · Color: black · Nominal diameter: 19 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Total length: 82 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Width: 70 mm · Vacuum connection: Yes · Height: 124 mm · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 75 · Size of secondary nozzle: 45 · Area of application: Racing · Area of application: Tuning
139,70 EUR
swiing® revival nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Quantity: 10 pcs · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110 · Nozzle thread: M5x0.8 (standard thread)
24,40 EUR
swiing® ingenious intake manifold 16 mm | Puch X30 NS, NL, Sprinter
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 16 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Total height: 70 mm · Total length: 48 mm · Area of application: Tuning
46,50 EUR
58,10 EUR
GPO 19.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Nominal diameter: 19.5 mm · Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: PHBG AS · Choke control: Hand choke · Width: 71 mm · Total length: 71.5 mm · Color: black · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 85 · Ø Air filter connection: 32 mm · Height: 123 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke nozzle size: 55 · Nozzle block: 262AU · Size of secondary nozzle: 50 · Area of application: Tuning
93,10 EUR
swiing® ingenious intake manifold 15 mm | Puch X30 NS, NL, Sprinter
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 15 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Total height: 70 mm · Total length: 48 mm · Area of application: Tuning
81,50 EUR
AKOA intake manifold 19 mm PHBG angular | Puch X30 NS, NL Z50, E50
Manufacturer: AKOA · Material: Aluminum · Camouflaged: No · Ø inside: 19 mm · Mounting type: Nuts · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Ø External connection: 24 mm · Total height: 68 mm · Height flange center hole: 57 mm · Area of application: Tuning
81,50 EUR
Moped fans also bought
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: PHBG CS · Color: black · Nominal diameter: 19 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Total length: 82 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Width: 70 mm · Vacuum connection: Yes · Height: 124 mm · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 75 · Size of secondary nozzle: 45 · Area of application: Racing · Area of application: Tuning
139,70 EUR
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
2,80 EUR
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
2,80 EUR
Collection only possible with online purchase and appointment.
