Gasket set from Athena suitable for your Kreidler moped, moped and small motorcycle with 50 cc 4-speed engine.
The gasket set contains the following flat gaskets:
- 1 pc. Center gasket 0.3 mm (paper)
- 1 pc. Gearbox cover gasket 0.3 mm (paper)
- 1 pc. Cylinder base gasket 0.3 mm, 44 x 44 mm (paper)
- 1 pc. Cylinder head gasket 0.15 mm, 44 x 44 mm (aluminum)
- 1 pc. Inlet gasket 1 mm, hole spacing 42 mm (paper)
You can find more gaskets and sealants in the accessories section.
Quality product from the Italian manufacturer Athena.
Details
| Manufacturer | Athena |
| Material | Sealing paper, Aluminum |
| Number of components | 5 pcs |
| Thickness | 0.3 mm, 0.15 mm, 1 mm |
Suitable for the following models
| Kreidler |
Accessories & related products
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Contents [ml]: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 315 °C · Area of application: Chemistry
23,20 EUR
331,43 EUR/l
Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc
Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Contents [ml]: 70 ml · Area of application: Chemistry · Color: red · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm
26,70 EUR
Not in stock
381,43 EUR/l
Moped fans like you also bought:
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Material: Polyvinyl chloride (PVC) · Color: black · Color: white · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Width: 123 mm · Width: 230 mm · Width: 330 mm · Place of use: Frame (+ tank) · Height: 26 mm · Height: 60 mm · Height: 65 mm
11,00 EUR
Biturbo muffler 28 mm chrome / gold
Manufacturer: Biturbo · Material: Steel · Surface: chrome-plated · Ø Internal connection: 28.5 mm · Color: Chrome · Color: gold · Total length: 670 mm · Exhaust type: Cone / double cone · Number of fixing points: 1 pcs · Mounting type: Welded lug
56,90 EUR
Not in stock
Clamping screw with slotted chain guard black | Pony GTX, Cilo, KTM
Manufacturer: Pony · Material: Hard plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: black · Color: silver · Number of components: 1 pcs · Drive: External hexagon · Drive: Slot · Thread type: Sheet metal screw · Thread length: 18 mm · Total length: 29.5 mm · Ø External head: 19 mm · Area of application: Standard
2,80 EUR
OMG fuel tap vertical M16x1 labeled (with union nut) pointing downwards
Manufacturer: OMG · Possible lever positions: open / closed / reserve · Thread type: MF16x1 (fine pitch thread) · Material lever: Plastic · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: below · Mounting type: Union nut · Spare tube shape: straight · Reserve level: 50 mm
19,70 EUR
BING 68° carburetor pipe bend M6x0.75 SRA / SSE NOS
Manufacturer: BING · Component group Carburetor: Adjusting screws, float, etc. · Material: Aluminum · Material: Brass · Surface: nickel-plated · Angle: 68 ° · Thread type: MF6x0.75 (fine pitch thread) · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SSE · Ø outside: 6 mm · Ø outside: 11.95 mm · Ø outside: 14.35 mm · Height: 28 mm · Total length: 23.5 mm · Internal thread: M5x0.8 (standard thread)
26,00 EUR
Collection only possible with online purchase and appointment.
