High-quality 40 mm aluminum cylinder with Nikasil coating for fan-cooled Kreidler Florett Super TS, Mustang (1965–1969), Kreidler Florett GT–TM, and other small motorcycles.
The cylinder kit can also be installed as a tuning cylinder in Kreidler models such as the K 54, K54 0, K54 0M, K 54/2A, LF – LF, LH K 54/32, etc.
The cylinder was designed to be nearly identical to the original Zeta cylinder with 5.8 PS. The durable cylinder delivers strong torque and solid performance even at high RPMs.
Scope of delivery as shown in Figure 1, including cylinder, piston kit, and gasket set.
Exhaust flange diameter: 32 mm
; Intake port: 15 x 25 mm
; Intake stud spacing: 32 mm
; Piston pin diameter: 14 mm
; Mounting hole pattern: 43.5 x 43.5 mm
Note: Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
Brand-name product from the manufacturer NC-MOTORPARTS.
| Nominal diameter | 40 mm |
| Manufacturer | NCMotorparts |
| Material | Aluminum |
| Camouflaged | No |
| Surface | sandblasted |
| Area of application | Tuning |
| Ø Outlet outside | 32 mm |
| Ø piston pin (B) | 14 mm |
| Hole pattern [mm] | 44 x 44 |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 32 mm |
| Number of fixing points | 4 pcs |
| Outlet type | clamped |
| Kreidler |
Accessories & related products
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Diameter: 5.95 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Total length: 30 mm · Thread length: 12 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9
2,10 EUR
Rito crankshaft Kreidler Florett K3 42 mm stroke
Manufacturer: Rito · Cheek type: standard · Crankshaft stroke: 42 mm · Connecting rod length center-center: 85 mm · Total length of crankpin on clutch side: 64.2 mm · Total length crankpin ignition side: 63.8 mm · Ø piston pin (B): 14 mm · Area of application: Standard · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Wide crank webs: 39.9 mm · Number of gears: 3 pcs · Number of gears: 4 pcs · Number of gears: 5 pcs
303,30 EUR
44 mm tuning cylinder | Kreidler Florett RS, RMC
Material: Aluminum · Camouflaged: No · Surface: sandblasted · Number of fixing points: 4 pcs · Nominal diameter: 44 mm · Ø piston pin (B): 14 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Hole spacing inlet: 47 mm · Outlet type: slanted · Hole spacing outlet: 50 mm
338,30 EUR
279,90 EUR
Parmakit 44 mm cylinder kit tuning | Kreidler Florett RS, RMC
Manufacturer: Parmakit · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Number of fixing points: 4 pcs · Ø Outlet outside: 32 mm · Nominal diameter: 44 mm · Ø piston pin (B): 14 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Hole spacing inlet: 47 mm · Outlet type: clamped
350,00 EUR
Explore categories from Cylinder
Moped fans also bought
swiing® revival light switch MERIT two buttons
Width: 27 mm · Height: 30 mm · Manufacturer: GPO · Housing material: Steel · Color: Chrome · Substructure material: Plastic · Color: black · Surface: chrome-plated · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Number of positions: 3 pcs · Total length: 55 mm · Ø Handlebars: 22 mm
22,10 EUR
Not in stock
Speedometer 120 km/h Ø 60 black / chrome
Material: Metal · Material: Plastic · Surface: chrome-plated · Color: Chrome · Color: black · Color: white · Ø Receptacle: 60 mm · Maximum speed: 120 Km/h · Lighting: without · Signal type Tacho: analog · 4-edge speedometer cable: 1.8 mm · Ø outside: 64.8 mm · Thread type: MF10x1 (fine pitch thread) · Total height: 70 mm · Depth: 50 mm
110,70 EUR
Working late? Evening hours on Thursday until 20:00
