22 mm replica exhaust suitable for Puch Maxi S & N, Puch X30 Sport NS / NL, as well as Supermaxi LG1 / LG2 (if Puch Maxi cylinder is mounted) moped / moped.
The exhaust is a 2-piece, bolted, with corresponding Puch number.
The M7 bolt at the end of the flame tube must be locked with an additional nut, otherwise the nut may loosen and the muffler insert may fall out.
We also recommend replacing the mounted gasket between the flame tube and the muffler. You can find a high-quality replacement product in the accessories section.
Attention: The sound of the replica exhausts can be slightly louder than the originals, which can be remedied by wrapping wool around the muffler. You will find this in the accessories section below.
Original Puch spare part number: 349.1.16.000.2
A quality product made in Portugal.
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | chrome-plated |
| Total length | 920 mm |
| Ø outside | 58 mm |
| Color | Chrome |
| Mounting type | Welded lug, Stud bolts & nuts |
| Number of fixing points | 4 pcs |
| Ø Flame tube outside | 22 mm |
| Exhaust type | Flute |
| Flame tube attachment | Flange |
| Puch | E50 |
Accessories & related products
Stop nut M7 Inox
Material: Chrome steel (known as Nirosta®) · Nut type: Self-securing nut · Drive: External hexagon · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread)
0,80 EUR
Moped fans also bought
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Area of application: Standard · Width: 125 mm · Ø cylinder: 38 mm · Height: 55 mm · Total length: 135 mm · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No · Hole pattern [mm]: 44 x 44
34,40 EUR
38,40 EUR
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
18,60 EUR
GPO 44 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Area of application: Tuning · Width: 125 mm · Ø cylinder: 44 mm · Height: 55 mm · Total length: 135 mm · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No · Hole pattern [mm]: 44 x 44
50,10 EUR
Hot 
swiing® ingenious 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Area of application: Tuning · Nominal diameter: 15 mm · Width: 50 mm · Choke control: Hand choke · Carburetor type: SRE · Height: 95 mm · Total length: 66 mm · Ø fuel hose connection: 6 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
93,30 EUR
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Total height: 53 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Area of application: Tuning · Hole spacing inlet: 38 mm · Ø inside: 15 mm · Total length: 46 mm · Mounting type: Screws · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Height flange center hole: 43 mm
40,70 EUR
Collection only possible with online purchase and appointment.
