
High-quality standard clutch from Ferodo with 22 teeth, compatible with your Vespa P 125, P 150, GTR, TS, Sprint V, and Super.
This pre-assembled clutch unit is designed as a 6-spring version and is suitable for stock engines as well as lightly tuned setups. The Ferodo clutch is used in Vespa large-frame engines, which were installed in models from approximately 1961 to 1994. The Z22 clutch is standard equipment in 150 cc engines, but can also be used in 80 cc or 125 cc engines to increase the gear ratio. This is particularly useful with larger cylinders. For high-performance engines, we recommend switching to a larger clutch type with a diameter of approximately 115 mm.
The clutch features three clutch plates and six springs and is designed for Z67 or Z68 primary drives. Thanks to its pre-assembled design, installation in your scooter’s engine is particularly straightforward.
You can find new transmission fluid and new clutch nuts in the accessories section.
A quality product from the Italian manufacturer FERODO.
Original Piaggio part number: 113070
| Manufacturer | FERODO |
| Area of application | Standard |
| Ø outside | 108.5 mm |
| Number of slats | 3 pcs |
| Number of springs | 6 pcs |
| Piaggio OEM number | 113070 |
| Vespa | Vespa PX, T5, Cosa - P125X · VNX1T · 1977–1982 (Old PX) External Lock , P150X · VLX1T · 1978–1993 , P150S · VBX1T · 1978–1990 Vespa Rally, Sprint, GT, GTR, TS, SS180, GS160 - 125 GTR · VNL2T · 1968–1978 , 150 Sprint Veloce · VLB1T · 1969–1979 , 125 TS · VNL3T · 1975–1978 Vespa VNA, VNB, VBA, VBB, Super, GT - 125 Super · VNC1T · 1965–1969 |
Accessories & related products
RMS castle nut clutch | Vespa Largeframe, Wideframe
Manufacturer: RMS · Material: Steel · Surface: galvanized (blue) · Ø outside: 19 mm · Nut type: Castle nut · Thread type: MF12x1.5 (fine pitch thread) · Height: 7.25 mm · Piaggio OEM number: 20359 · Piaggio OEM number: 020375 · Piaggio OEM number: 040316
3,40 EUR
CIF castle nut & safety cage clutch | Vespa Largeframe, Wideframe
Manufacturer: CIF · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Ø outside: 19 mm · Nut type: Castle nut · Thread type: MF12x1.5 (fine pitch thread) · Nominal diameter (thread): 12 mm · Height: 8 mm · Piaggio OEM number: 20359 · Piaggio OEM number: 020375 · Piaggio OEM number: 22313 · Piaggio OEM number: 040316
6,45 EUR
Explore categories from Clutch
Moped fans also bought
swiing® ingenious Cable-Pull Starter for MVT Ignition | Puch E50
Manufacturer: swiing® ingenious parts · Width: 150 mm · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black-matt · Ø outside: 130 mm · Ignition system: MVT Allumage · Total length: 170 mm · Height: 82 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm
174,90 EUR
Classic pump with hose 33 - 37 cm chrome
Valve type: Schrader A/V (normal car valve) · Valve type: TR4 Auto valve · Valve type: TR6 car valve · Valve type: TR87 Auto valve (90° angled) · Width: 25 mm · Material: Steel · Surface: chrome-plated · Total length: 370 mm · Number of components: 2 pcs
29,10 EUR
swiing® ingenious pull starter black | Piaggio Ciao
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Plastic · Material: Steel · Surface: anodized · Color: black · Number of fixing points: 3 pcs · Hole spacing: 75 mm · Hole spacing: 78 mm · Ø outside: 115 mm · Total length: 160 mm · Width: 135 mm · Height: 103 mm
227,40 EUR





