38 mm gray cast iron tuning cylinder with a round, slot-controlled 12 mm intake, suitable for your moped, scooter, or small motorcycle equipped with a manual transmission and a fan-cooled Sachs 50/2 (DE), 50/3 (DE), or 50/4 (DE) engine.
This slotted cylinder is suitable for Sachs 2-, 3-, and 4-speed fan-cooled engines, which were installed in models such as the Hercules 50/ALS, 50/2 S, 50/KS, 50/2 DK, 50/3 LS, 50/4 LKS, Gritzner, and other small motorcycles. The smaller cooling fins make installation on a Swiss Sachs 50/2 (502) engine easier, as the fan shroud can be mounted without modifications. However, modifications to the stud hole locations are unavoidable.
The cylinder is made of gray cast iron and has a sandblasted surface. With a displacement of 50 cc and a 12 mm round intake, the tuning cylinder is suitable for a simple performance upgrade on fan-cooled Sachs engines.
Bore pattern: 51x40 mm
; Exhaust thread: M35x2
; Intake thread: M5x0.8
Note: The cylinder is shipped loose and without a piston, gasket set, studs, or other mounting parts.
You can find compatible components in the accessories section.
A good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Gray cast iron |
| Surface | sandblasted |
| Displacement | 50 ccm |
| Crankshaft stroke | 42 mm |
| Nominal diameter | 38 mm |
| Hole spacing inlet | 31 mm |
| Camouflaged | No |
| Number of fixing points | 4 pcs |
| Outlet type | Union nut |
| Area of application | Tuning, Racing |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) |
Accessories & related products
Bing 12 mm SSB carburetor 1/12/168 replica
Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Material: Plastic · Carburetor type: SSB · Color: black · Total length: 126 mm · Nominal diameter: 12 mm · Width: 85 mm · Height: 90 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke · Nozzle size: 63 · Mounting type: Flange · Hole spacing inlet: 31 mm · Area of application: Standard
81,60 EUR
GPO piston 38 mm | Sachs 50/2, 50/3, 50/4 fan-cooled
Manufacturer: GPO · Nominal diameter: 38 mm · Ø outside piston (A): 37.94 mm · Compression height (C): 27.5 mm · Curvature (D): 3.5 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 1.7 mm · Thick piston ring: 2 mm · Weight piston kit: 78 g · Alternative version of the Sachs OEM number: 0290 058 025
39,60 EUR
swiing® revival nozzle set (46 - 56) Bing SSB | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SSB · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54 · Nozzle size: 56 · Width across flats: 8 mm
44,20 EUR
swiing® revival nozzle set (58 - 68) Bing SSB | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SSB · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Width across flats: 8 mm
44,20 EUR
swiing® revival Stud Bolt, M5x26, Galvanized (Grade 10.9) | Sachs (A1474)
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 5 mm · Total length: 26 mm · Thread length: 7 mm · Thread length: 14 mm · Strength class: 10.9 · Pony OEM number: A1474 · Sachs OEM no.: 0241 031 101
2,10 EUR
Explore categories from Cylinder
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
12,70 EUR
28,22 EUR/l
Oil seal NBR 15/30/7 B AS | Sachs 503, 50/2
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: B - With sheet metal outer casing / one sealing lip. · Manufacturer: Sachs · Material: NBR · Ø outside: 30 mm · Ø inside: 15 mm · Width: 7 mm · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
6,30 EUR
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Area of application: Standard · Material: Brass · Material: Steel · Width: 8 mm · Ø inside: 15 mm · Ø outside: 35 mm · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
29,10 EUR
GPO piston 38 mm | Sachs 50/2, 50/3, 50/4 fan-cooled
Manufacturer: GPO · Nominal diameter: 38 mm · Ø outside piston (A): 37.94 mm · Compression height (C): 27.5 mm · Curvature (D): 3.5 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 1.7 mm · Thick piston ring: 2 mm · Weight piston kit: 78 g · Alternative version of the Sachs OEM number: 0290 058 025
39,60 EUR
swiing® revival gasket cylinder head 38 mm cylinder | Sachs 503, 502, 50/2, 50/3, 50/4
Place of use: Cylinder head · Manufacturer: swiing® revival parts · Material: Aluminum · Nominal diameter: 38 mm · Ø cylinder: 38 mm · Thickness: 0.2 mm · Hole pattern [mm]: 37 x 37 · Area of application: Standard
5,70 EUR
swiing® revival Stud Bolt, M5x26, Galvanized (Grade 10.9) | Sachs (A1474)
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 5 mm · Total length: 26 mm · Thread length: 7 mm · Thread length: 14 mm · Strength class: 10.9 · Pony OEM number: A1474 · Sachs OEM no.: 0241 031 101
2,10 EUR
GPO 38 mm cylinder kit slotted | Sachs 50/2, 50/3, 50/4 fan-cooled (DE)
Nominal diameter: 38 mm · Manufacturer: GPO · Material: Gray cast iron · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 51 x 40 / 37 x 37 · Camouflaged: No · Area of application: Tuning
139,90 EUR
125,90 EUR
Working late? Evening hours on Thursday until 20:00
