Original reproduction air filter for your Puch Maxi S / N moped.
The air filter box is supplied in disassembled condition.
To make assembly easier, we recommend briefly placing the air filter housing in warm water to soften the plastic.
Carburetor connection diameter: 20 mm
Select the desired air filter screen in the selection field:
- Standard: original air filter screen
- Racing: screen with fewer filter layers for more air flow
- Tuning: two-layer filter mat for maximum air flow
Note: From the factory, a joint with silicone sealant was drawn around the seam of the original air filter after the two parts were joined to exclude the risk of air leakage. We recommend doing the same with this air filter.
You will find a suitable sealant and other useful parts in the accessories section.Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Manufacturer: GPO · Color: black · Material: Plastic · Total length: 230 mm · Height: 103 mm · Ø inside: 20 mm · Mounting type: Plug connection clamped · Number of fixing points: 2 pcs · Area of application: Original, Standard
| Manufacturer | GPO |
| Material | Plastic |
| Color | black |
| Ø Internal connection | 20 mm |
| Puch |
Accessories & related products
swiing® revival nozzle set M3.5 (54 - 64) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Total length: 6 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64
18,60 EUR
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Area of application: Chemistry · Material: Silicone · Contents [ml]: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 315 °C
23,20 EUR
331,43 EUR/l
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
3,25 EUR
swiing® revival side protection screw set black | Puch Maxi S
Thread length: 35 mm · Thread length: 50 mm · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Thread type: M5x0.8 (standard thread)
15,10 EUR
Hot 
swiing® ingenious 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Mounting type: Plug connection clamped · Total length: 66 mm · Carburetor type: SRE · Width: 50 mm · Nominal diameter: 15 mm · Height: 95 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
93,30 EUR
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Mounting type: Screws · Ø External connection: 20 mm · Ø inside: 15 mm · Total length: 46 mm · Total height: 53 mm · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Hole spacing inlet: 38 mm · Area of application: Tuning
40,70 EUR
Collection only possible with online purchase and appointment.
