Special multi-puller tool for versatile use on your moped / moped.
The 7-in-1 tool can be used for the following items:
- swiing Zündung (34 mm)
- MVT Zündung (36 mm)
- PVL Zündung (34 mm)
- HPI Zü(34 mm)
- Selettra Zündung (34 mm)
- KTM coupling (30 mm)
- E50 replica coupling (30 mm)
Thread: M12
Wrench width (SW): 17 mm
Material: Steel, galvanized
Attention: Cannot be used for the original E50 & Surflex clutch.
The respective positions are lasered around the tool so that the application always works on the first attempt.
The corresponding screws and the thread protection cover are included in the scope of delivery.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Width across flats Screw | 17 mm |
| Manufacturer | GPO |
| Material | Steel |
| Surface | galvanized (blue) |
| Area of application | Special tool |
| Thread type | M12x1.75 (standard thread) |
| Universal |
| Puch |
| Sachs |
| Piaggio |
Accessories & related products
Hot 
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Number of components: 1 pcs · Area of application: (Dis)assembly tool · Strength class: 8.8
11,60 EUR
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Light coil voltage: 12 V · Weight: 340 g · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Number of fixing points: 6 pcs · Ø Internal flywheel: 61.5 mm · Tension: 12 V · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Performance: 60 W · Area of application: Tuning · Mounting type: Screws
350,00 EUR
Buzzetti flywheel trigger combination M26x1.5 / M27x1.25
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: Buzzetti · Material: Steel · Surface: galvanized (blue) · Thread type: MF26x1.5 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Area of application: (Dis)assembly tool · Strength class: 8.8
23,20 EUR
MBR Clutch KTM SX50 | Puch E50
Manufacturer: MBR · Material: Steel · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
396,60 EUR
Selettra internal rotor ignition left-, right-turning
Manufacturer: Selettra · Material: Aluminum · Performance: 90 W · Direction of rotation: left · Direction of rotation: right · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning
303,30 EUR
PVL internal rotor ignition clockwise without keyway
Manufacturer: PVL · Material: Aluminum · Direction of rotation: right · Ø mounting plate: 90 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning
291,60 EUR
MVT internal rotor ignition incl. rev limiter & light 12V | Puch / Sachs
Weight: 268 g · Manufacturer: MVT Allumage · Manufacturer: swiing® ingenious parts · Tension: 12 V · Mounting type: Screws · Performance: 65 W · Direction of rotation: left · Ø mounting plate: 96 mm · Number of fixing points: 2 pcs · Ø Flywheel outside: 49.2 mm · Ø cable: 7 mm · Area of application: Tuning
425,80 EUR
swiing® ingenious Special Screw M12x1.25, tapered, 90°, galvanized
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1.25 (fine pitch thread) · Nominal diameter (thread): 12 mm · Drive: External hexagon · Width across flats: 18 mm · Area of application: Standard · Total length: 38 mm · Thread length: 38 mm · Strength class: 10.9 · Number of components: 1 pcs
9,80 EUR
Normio M6x30 Cylinder Head Hex Head Screw, Strength Class 12.9, Zinc-Plated
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Drive: Hexagon socket · Screw head: Cylinder head · Ø External head: 10 mm · Shank: No · Total length: 36 mm · Thread length: 30 mm · Strength class: 12.9
2,45 EUR
swiing® ingenious screw M12x1.25 x 51 hexagonal ball end & cap
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1.25 (fine pitch thread) · Nominal diameter (thread): 12 mm · Drive: External hexagon · Screw head: Hexagon · Width across flats: 19 mm · Area of application: Special tool · Area of application: Workshop accessories · Thread length: 42 mm · Number of components: 1 pcs
10,40 EUR
Explore categories from Tools
Moped fans also bought
Hot
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Number of components: 1 pcs · Area of application: (Dis)assembly tool · Strength class: 8.8
11,60 EUR
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm
2,80 EUR
Working late? Evening hours on Thursday until 20:00
