Inner rubber sleeve for the heat-resistant 28 mm exhaust clamp, suitable for your moped, scooter, or small motorcycle.
The rubber sleeve serves as a replacement part for the exhaust flange and neatly connects flame tubes with an outer diameter of 28 mm to the matching muffler. The special FPM/FKM rubber compound (commonly known as Viton) is characterized by excellent resistance to high temperatures, mineral oils, fuels, many organic solvents, and chemicals. The material has been laboratory-tested for its aging properties and technical characteristics; it remains flexible even at high temperatures of up to 200 °C and does not become brittle.
The inner diameter has been kept smaller than the outer diameter of the parts to be connected—at 25 mm and 29 mm, respectively—to ensure an optimal seal.
Note: The exhaust clamp must not be tightened too much under any circumstances, as this will compress the rubber too much and may cause it to tear.
You can find the matching complete exhaust clamp among the accessories.
A sophisticated product meeting the highest standards from the swiing® quality brand.
| Manufacturer | swiing® ingenious parts |
| Material | FPM / FKM (colloquially known as Viton) |
| Ø inside | 25 mm |
| Ø inside 2 | 29 mm |
| Ø outside | 33 mm |
| Ø Bundle | 35.5 mm |
Accessories & related products
Hot 
swiing® ingenious Exhaust Clamp, 28 mm, Heat-Resistant, Chrome
Manufacturer: swiing® ingenious parts · Material: FPM / FKM (colloquially known as Viton) · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø inside: 25 - 28 mm · Width: 40 mm · Mounting type: Nuts & bolts · Total length: 40 mm
25,60 EUR
Explore categories from Exhaust system
Moped fans also bought
Hot
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread length: 12 mm · Total length: 30 mm · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Strength class: 10.9
2,10 EUR
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Area of application: Standard · Nipple length: 5 mm
2,80 EUR
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift
13,40 EUR
29,78 EUR/l
M10 sealing ring Fiber
Thickness: 1.6 mm · Material: Fiber · Surface: raw · Area of application: Standard · Place of use: Carburetor · Place of use: Motor housing · Ø inside: 10 mm · Ø outside: 13.8 mm · Pony OEM number: A1817 · Pony OEM number: A5650 · Puch OEM number: 27071 · Sachs OEM no.: 0250 042 001 · Sachs OEM no.: 0650 131 000
1,85 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Thickness: 1 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
4,55 EUR
66HEROES Mounting pin M12x1 Wheel axle License plate holder side Inox
Ø outside: 15 mm · Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Thread type: MF12x1 (fine pitch thread) · Drive: External hexagon · Nominal diameter (thread): 12 mm · Height: 32 mm · Width across flats: 19 mm
15,10 EUR
Working late? Evening hours on Thursday until 20:00
