High-quality clutch basket with spur gear suitable for your Puch moped / moped with E50 3- and 4-bearing engine and pedal start mechanism.
This set contains CNC-machined parts made of hardened steel, which have been specially designed for high loads. The straight-toothed gear wheel made of special steel impresses thanks to the finely ground teeth for optimum running smoothness and very low wear.
The small gear wheel attached to the clutch basket is firmly welded to the clutch basket and thus offers the optimum conditions for both an original setup and a tuning setup.
| Manufacturer | ASP |
| Material | Steel |
| Surface | hardened & ground |
| Number of teeth | 19 pcs, 94 pcs |
| Toothing type | straight toothed |
| Area of application | Tuning |
| Puch | E50 |
Accessories & related products
Explore categories from Gearbox & housing (motor)
Moped fans also bought
GPO gasket set | Puch E50
Manufacturer: GPO · Area of application: Standard · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm
11,60 EUR
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Thread type: M8x1.25 (standard thread) · Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Color: silver · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Total length: 18 mm · Thread length: 12 mm · Puch OEM number: 901.1053
4,10 EUR
swiing® revival stud bolt set M6 x 106 | Puch
Thread type: M6x1 (standard thread) · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 106 mm · Drive: External hexagon · Nominal diameter (thread): 6 mm · Diameter: 5.9 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
8,65 EUR
swiing® revival nut / spring washer clutch E50 | Puch Maxi
Thread type: MF10x1 (fine pitch thread) · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Drive: External hexagon · Height: 8 mm · Nominal diameter (thread): 10 mm · Width across flats: 17 mm
4,55 EUR
swiing® revival screw set engine galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
11,60 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 1 mm · Number of fixing points: 4 pcs · Ø inside: 106 mm · Ø outside: 116 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
4,55 EUR
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Area of application: Chemistry · Contents: 70 ml · Color: red · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm
26,70 EUR
381,43 EUR/l
swiing® revival thrust washer set Ø 15 / 17 mm | Puch E50
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: hardened & ground · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm · Ø inside: 15 mm · Ø inside: 17 mm · Ø outside: 22 mm · Ø outside: 24 mm
45,40 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
