High-quality clutch basket with spur gear suitable for your Puch moped / moped with E50 3- and 4-bearing engine and kickstart mechanism.
This set contains CNC-machined parts made of hardened steel, which have been specially designed for high loads. The straight-toothed gear wheel made of special steel impresses thanks to the finely ground teeth for optimum running smoothness and very low wear.
The small gear wheel attached to the clutch basket is firmly welded to the clutch basket and thus offers the optimum conditions for both an original setup and a tuning setup.
| Manufacturer | ASP |
| Surface | hardened & ground |
| Material | Steel |
| Number of teeth | 19 pcs, 94 pcs |
| Toothing type | straight toothed |
| Area of application | Tuning, Racing |
| Puch | E50 |
Accessories & related products
HK Clutch "Racing" Kickstarter Aramid | Puch E50
Manufacturer: HK Clutches · Material addition: Aluminum · Material: Steel · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.3 mm · Ø inside: 13.6 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Area of application: Racing
350,00 EUR
Explore categories from Gearbox & housing (motor)
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Surface: coated · Color: blue · Material: Spring steel · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Number of components: 3 pcs · Area of application: Tuning
20,90 EUR
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Camouflaged: Yes · Surface: sandblasted · Material: Aluminum · Ø cylinder: 45 mm · Total length: 135 mm · Height: 55 mm · Candle thread: short · Width: 125 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Area of application: Tuning · Decompressor: No
38,40 EUR
Nut flywheel M10x1 SW15 serrated
Surface: galvanized (blue) · Nut type: Flange nut · Material: Steel · Nominal diameter (thread): 10 mm · Drive: External hexagon · Ø outside: 19.8 mm · Thread type: MF10x1 (fine pitch thread) · Height: 10.5 mm · Width across flats: 15 mm · Area of application: Standard
3,40 EUR
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Diameter: 5.9 mm · Material: Steel · Nominal diameter (thread): 6 mm · Drive: External hexagon · Total length: 106 mm · Thread type: M6x1 (standard thread) · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
8,65 EUR
swiing® ingenious crankshaft "High End" C3/4 & FPM (+1 mm stroke) | Puch E50
Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Manufacturer: swiing® ingenious parts · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 44 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Thread type: MF10x1 (fine pitch thread) · Ø Connecting rod eye: 15 mm · Weight: 970 g · Thread length: 11 mm · Ø piston pin (B): 12 mm · Thread length: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Area of application: High End · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Number of gears: 1 pcs
268,30 EUR
Working late? Evening hours on Thursday until 20:00
