Strengthening plate made of high-quality stainless steel for the three-jaw centrifugal clutch of your Puch moped / moped with E50 engine.
This precision-manufactured stabilizing plate prevents bending of the clutch shoe mounting bolts, especially on tuned engines, and thus ensures flawless operation, even under high loads.
The scope of delivery consists of the cover plate, three M4 Torx countersunk screws and three retaining rings.
Note: For mounting on original clutches, three M4 threads must first be inserted into the mounting bolts of the base plate.
An alternative reinforcement plate for the 2-jaw clutch, complete engine clutches and other individual parts can be found under accessories.
Quality product from the Austrian manufacturer A.S.P - Puch Parts.
| Manufacturer | ASP |
| Material | Chrome steel (colloquially known as stainless steel) |
| Thickness | 1.55 mm |
| Ø inside | 40 mm |
| Puch | E50 |
Accessories & related products
ASP clutch 3-jaw "woven" Aramid | Puch E50
Manufacturer: ASP · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Aramid (colloquially known as Kevlar) · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 91.5 mm · Number of springs: 6 pcs · Thickness: 21.5 mm
279,90 EUR
Not in stock
Explore categories from Clutch
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Manufacturer: GPO · Area of application: Original · Area of application: Standard · Material: Aluminum · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Thickness: 20.9 mm · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm
58,20 EUR
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Material: Spring steel · Color: blue · Surface: coated · Number of components: 3 pcs · Total length: 28 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm
20,90 EUR
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Area of application: Tuning · Camouflaged: Yes · Material: Aluminum · Surface: sandblasted · Ø cylinder: 45 mm · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No
38,40 EUR
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Area of application: Tuning · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Hole spacing inlet: 38 mm
11,60 EUR
swiing® revival stud bolt set M6 x 106 | Puch
Thread type: M6x1 (standard thread) · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 106 mm · Drive: External hexagon · Nominal diameter (thread): 6 mm · Diameter: 5.9 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
8,65 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 1 mm · Number of fixing points: 4 pcs · Ø inside: 106 mm · Ø outside: 116 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
4,55 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
