43 mm racing cylinder with 63 cc, suitable for Sachs mopeds / mopeds with 503 2AL, AAL, 2BL, ABL CH engines.
Thanks to the additional holes for the cylinder head bolts and the two mounts for the blower cover, the cylinder can also be fitted to the Sachs 50/2 and 502 models, although the intake and exhaust accessories must be made by yourself.
The large displacement and the huge intake ensure plenty of torque.
The cylinder can be used on both Sachs 50/2 and Sachs 503 mopeds with the original cylinder head, but it should be noted that the pinch point at the narrowest point should be at least 1.5 mm. To ensure optimum operation and thus tease the maximum power out of the cylinder, we recommend adapting the cylinder head to a combustion chamber diameter of 43 mm. It is best to use the 41 mm cylinder head from the accessories as a basis for this.
We also recommend that you use reinforced clutch springs so that the entire engine power can be transferred to the rear wheel. You can find these in the accessories section.
The BADASS 17 mm or 15 mm intake manifold is the perfect match for the cylinder, with which either a 15 mm Bing SRE or a 17 mm carburettor can be used.
You can find the intake manifolds, as well as carburetors, in the accessories section.
Details:
- Grey cast iron reproduction cylinder with Ø 43.0 mm bore
- Slot-controlled
- Ø 19 mm intake
- Optimized Öoverflow channels
- Improved timing
- No spindling of the engine housing necessary (Ø cylinder neck 45.0 mm)
- Ø external exhaust manifold connection: 26 mm
- Incl. Ø 43 mm piston from the Italian manufacturer -GOL-
Differences to the GPO Pomodoro - replica cylinder:
- The BADASS 15 mm & 17 mm intake manifolds fit perfectly on the cylinder
- It is not possible to fit original or swiing intake manifolds
- Thanks to the holes for the cylinder head and blower, there is no risk of damage;
- There is the option of adapting the cylinder to a 50/2 or 502 engine
- Lower intake timing
Installation instructions in German and the matching piston are included in the scope of delivery.
Attention: It is essential to replace the rubber silencers on 503 BL engines with aluminum silencers due to the increased power output in order to avoid fatigue fracture of the exhaust flange.
The aluminum silentblocs, matching gaskets, reinforced clutch springs and other add-on parts such as intake manifolds, carburettors, exhausts, etc. can be found in the accessories section.
Made by the BADASS brand.
The set includes the following fixed parts:
Hole pattern [mm]: 60 x 40 · Manufacturer: BAD ASS · Material: Gray cast iron · Nominal diameter: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22.5 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32.5 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Decompressor: No · Camouflaged: No · Area of application: Tuning
Details
| Manufacturer | BAD ASS |
| Material | Gray cast iron |
| Area of application | Tuning |
| Surface | sandblasted |
| Displacement | 63 ccm |
| Nominal diameter | 43 mm |
| Crankshaft stroke | 42 mm |
| Ø piston pin (B) | 12 mm |
| Ø cylinder neck | 45 mm |
| Ø Outlet outside | 26 mm |
| Ø outlet inside | 23 mm |
| Ø Inlet inside | 19 mm |
| Hole pattern [mm] | 40 x 60 / 37 x 37 |
| Thread inlet | M6x1 (standard thread) |
| Outlet type | clamped |
| Number of fixing points | 4 pcs |
| Camouflaged | No |
| Hole spacing inlet | 32 mm |
Suitable for the following models
| Sachs | 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
17 mm Bing SRF carburetor (replica)
Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Nominal diameter: 17 mm · Carburetor type: SRF · Width: 64 mm · Choke control: Hand choke · Nozzle thread: M4x0.7 (standard thread) · Ø fuel hose connection: 6 mm · Total length: 78 mm · Ø Internal connection: 23 mm · Height: 117 mm · Ø Air filter connection: 60 mm · Ø Air filter connection: 64 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Nozzle block: 2.xx · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
74,30 EUR
swiing nozzle set M3.5 (58 - 68) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Drive: Slot · Quantity: 6 pcs · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 6 mm · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68
18,20 EUR
swiing® ingenious 15mm tuning set carburetor HG short | Sachs 503
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 32 mm · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
183,10 EUR
swiing® ingenious 15 mm carburetor tuning camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Carburetor type: SRE · Width: 50 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Height: 95 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
91,50 EUR
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Material: Plastic · Area of application: Tuning · Width: 68 mm · Color: black · Filter type: Racing screen · Total length: 165 mm · Ø Internal connection: 20 mm · Height: 52 mm · Mounting type: Plug connection clamped · Camouflaged: No
68,60 EUR
swiing® revival cylinder base gasket 0.3 mm | Sachs 503
Manufacturer: swiing® revival parts · Material: Oiled paper · Area of application: Standard · Ø cylinder: 38 - 40 mm · Nominal diameter: 45 mm · Place of use: Cylinder base · Ø inside: 45 mm · Thickness: 0.3 mm · Hole pattern [mm]: 60 x 40
3,90 EUR
swiing resonance exhaust set Ø 28 / 70 mm | Sachs 503
Material: Steel · Surface: chrome-plated · Manufacturer: swiing · Color: Chrome · Total length: 730 mm · Ø outside: 70 mm · Flame tube attachment: Plug connection clamped · Mounting type: Screwed clamp · Exhaust type: Cigar · Ø Internal connection: 28 mm
160,20 EUR
swiing® revival silent blocks Alu Racing | Sachs 503 / 504 / 505 / 535
Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Ø inside: 8.3 mm · Ø outside: 21.95 mm · Nominal diameter inside: 8.5 mm · Total length: 13 mm · Ø Bundle: 26 mm · Alternative version of the Pony OEM number: A4286 · Alternative version of the Sachs OEM number: 0251 121 000
27,40 EUR
Hot 
BAD ASS intake manifold 17 mm SRF short version | Sachs 503 2AL, 2BL
Ø inside: 17 mm · Manufacturer: BAD ASS · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Hole spacing inlet: 32 mm · Ø External connection: 23 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Thread type: M6x1 (standard thread) · Height flange center hole: 45 mm · Total height: 56.5 mm · Total length: 54 mm
85,80 EUR
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503, Puch Velux
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Nominal diameter: 17 mm · Carburetor type: SRF · Width: 47 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5 mm · Total length: 61.5 mm · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Height: 89 mm · Height: 112 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 23 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
137,30 EUR
BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL
Manufacturer: BAD ASS · Material: Aluminum · Camouflaged: No · Ø inside: 17.8 mm · Mounting type: Stud bolt · Total length: 65 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 32 mm · Area of application: Tuning · Ø External connection: 20 mm · Total height: 55 mm · Height flange center hole: 45 mm
85,80 EUR
GPO cylinder gasket set BAD ASS Pandora 41 & 43 mm | Sachs 503, 50/2, 502
Manufacturer: GPO · Material: Oiled paper · Ø cylinder: 41 mm · Ø cylinder: 43 mm · Thickness: 0.3 mm · Thickness: 1 mm · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm · Area of application: Tuning · Number of components: 2 pcs · Hole spacing inlet: 32 mm
16,50 EUR
Not in stock
GPO piston 43 mm | Sachs 50/2, 50/3, 50/4
Manufacturer: GPO · Nominal diameter: 43 mm · Ø outside piston (A): 42.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 27.7 mm · Curvature (D): 2.4 mm · Total piston height (E): 50.2 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm
51,40 EUR
Moped fans like you also bought:
BING O-ring Bing SRE & 85, Ø 20 mm
Manufacturer: BING · Material: Rubber · Area of application: Standard · Surface: raw · Place of use: Carburetor · Color: black · Ø inside: 17.2 mm · Ø outside: 20 mm · Cord thickness: 1.4 mm · Number of components: 1 pcs · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
3,30 EUR
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing cage: Brass cage ball-guided · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Area of application: Standard · Material: Steel · Surface: blank · Stock number: BO15 · Bearing type: Shoulder bearing · Width: 10 mm · Ø inside: 15 mm · Ø outside: 40 mm · Ball bearing closed: No · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
28,50 EUR
Large gasket set with shaft seals Engine | Sachs 503
Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 13.3 mm · Hole pattern [mm]: 60 x 40 · Number of components: 14 pcs · Hole spacing inlet: 32 mm
45,70 EUR
Hot
BAD ASS intake manifold 17 mm SRF short version | Sachs 503 2AL, 2BL
Ø inside: 17 mm · Manufacturer: BAD ASS · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Hole spacing inlet: 32 mm · Ø External connection: 23 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Thread type: M6x1 (standard thread) · Height flange center hole: 45 mm · Total height: 56.5 mm · Total length: 54 mm
85,80 EUR
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503, Puch Velux
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Nominal diameter: 17 mm · Carburetor type: SRF · Width: 47 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5 mm · Total length: 61.5 mm · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Height: 89 mm · Height: 112 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 23 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
137,30 EUR
GPO cylinder gasket set BAD ASS Pandora 41 & 43 mm | Sachs 503, 50/2, 502
Manufacturer: GPO · Material: Oiled paper · Ø cylinder: 41 mm · Ø cylinder: 43 mm · Thickness: 0.3 mm · Thickness: 1 mm · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm · Area of application: Tuning · Number of components: 2 pcs · Hole spacing inlet: 32 mm
16,50 EUR
Not in stock
Collection only possible with online purchase and appointment.
