Unshielded spark plug connector made of hard plastic for your moped, scooter, and small motorcycle.
Solid housing made of phenolic resin (commonly known as Bakelite). The synthetic resin is resistant to heat, acid, and mechanical friction.
The spark plug wire is inserted into the guide. The pointed pin is screwed into the spark plug hole, thereby securing the spark plug wire.
Since the spark plug connector features a 6 mm SAE clamp mount, the end cap remains attached to the spark plug.
Fits spark plug wires up to a maximum diameter of 7 mm.
When using an electronic ignition system (HPI, PVL, Selettra, etc.), a noise-suppressed spark plug cap should be used.
You can find spark plugs, ignition wires, and alternative spark plug connectors compatible with this spark plug holder in the accessories section.
A German-made, high-quality product from BERU in OEM quality.
| Manufacturer | BERU |
| Material | Phenolic resin (colloquially known as Bakelite) |
| Color | black |
| Spark plug socket | SAE |
| Cable available | No |
| Suppressed | No |
| Subcategory | Spark plug connector |
| Ø cable | 5 mm, 7 mm |
Accessories & related products
Nos
Hot 
BERU Spark Plug Connector, 1 kΩ, Noise-Suppressed, NOS
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
11,60 EUR
Moped fans also bought
Hot
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Chain lock type: Spring lock · Rolling circumference: 1626 mm · Ø bore: 4 mm · Ø Pin: 3.94 mm
14,60 EUR
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Area of application: Standard · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø outside: 8 mm · Width across flats: 7 mm · Thread type: M6x1 (standard thread) · Ø Bundle: 6 mm · Total length: 15 mm · Thread length: 7 mm
2,90 EUR
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Area of application: Tuning · Color: blue · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Number of components: 3 pcs
20,90 EUR
Hot
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Total length: 30 mm · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Strength class: 10.9
2,10 EUR
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Nipple length: 10 mm
2,80 EUR
Nut flywheel M10x1 SW15 serrated
Material: Steel · Surface: galvanized (blue) · Nut type: Flange nut · Thread type: MF10x1 (fine pitch thread) · Ø outside: 19.8 mm · Nominal diameter (thread): 10 mm · Drive: External hexagon · Height: 10.5 mm · Width across flats: 15 mm · Area of application: Standard
3,40 EUR
Working late? Evening hours on Thursday until 20:00
