Hot 
Tuning clutch suitable for Puch Maxi S and N, as well as Puch Supermaxi LG1 mopeds equipped with an E50 engine. The clutch is designed for racing kits up to 65 ccm.
The racing clutch is equipped with a reinforcement plate that ensures the necessary stability even at high RPMs.
The package includes four different spring strengths for the respective applications:
- Red (pre-installed springs with thin wire): correspond to the original clutch springs.
- Blue: Stronger spring, for lightly tuned engines.
- Yellow: Stronger spring, for moderately tuned engines.
- Red: Strongest spring, for high-end tuning.
Before installing the centrifugal clutch, make sure that the openings of the retaining rings, also known as BZ rings, face outward. This prevents the BZ rings from coming loose during operation.
Note:
We recommend not using the yellow and red springs (high-end), as the high RPM during engagement causes increased friction. This leads to high temperatures and can ultimately result in the clutch being destroyed due to overheating. For better results, we recommend using swiing® springs or even switching to an aramid clutch.
You can find the springs and aramid clutch mentioned above, as well as everything you need for your clutch overhaul, in the accessories section.
Brand-name product from the manufacturer DMP.
| Manufacturer | DMP |
| Material | Steel |
| Area of application | Performance, Racing, High End, Tuning |
| Material addition | Chrome steel (colloquially known as stainless steel) |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Thickness | 22 mm |
| Number of springs | 3 pcs |
| Ø outside | 94 mm |
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Color: blue · Total length: 28 mm · Ø wire: 1.7 mm · Surface: coated · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Number of components: 3 pcs
20,90 EUR
18,60 EUR
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 0.5 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of components: 1 pcs · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
3,40 EUR
ASP clutch 2-jaw "sheet" Aramid | Puch E50
Manufacturer: ASP · Material: Steel · Material addition: Aramid (colloquially known as Kevlar) · Number of jaws: 2 pcs · Number of springs: 4 pcs · Thickness: 21.5 mm · Ø outside: 91.5 mm · Area of application: Racing · Area of application: Tuning · Alternative version of the Puch OEM number: VM 477.0 · Alternative version of the Puch OEM number: 349.1.12.004.0
198,30 EUR
Not in stock
ASP clutch 3-jaw "woven" Aramid | Puch E50
Manufacturer: ASP · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Aramid (colloquially known as Kevlar) · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 6 pcs · Ø outside: 91.5 mm · Thickness: 21.5 mm
279,90 EUR
Explore categories from Clutch
Moped fans also bought
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Number of components: 7 pcs · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Area of application: Standard
11,60 EUR
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Diameter: 5.9 mm · Total length: 106 mm · Nominal diameter (thread): 6 mm · Surface: galvanized (blue) · Width across flats: 10 mm · Drive: External hexagon · Thread type: M6x1 (standard thread) · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
8,65 EUR
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 0.5 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of components: 1 pcs · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
3,40 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 1 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of components: 1 pcs · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
4,55 EUR
Hot
swiing® ingenious crankshaft "High End" with mounted bearings | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread type: MF10x1 (fine pitch thread) · Thread length: 11 mm · Thread length: 15 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Weight: 968 g · Number of gears: 1 pcs · Area of application: High End · Area of application: Racing · Area of application: Tuning
209,90 EUR
Working late? Evening hours on Thursday until 20:00
