Stainless steel reinforcement plate for E50 input engines of Puch Maxi mopeds/mopeds.
The chrome steel plate can be used for 2- and 3-jaw clutches.
Bending of the clutch cams is no longer possible after mounting this 1.5 mm thick plate.
The M5 countersunk screws included with the clutch reinforcement plate have a strength of 10.9.
Ø inside: 40 mm
Ø outside: 90.5 mm
Thickness: 1.5 mm
Strength: 10.9
Material: stainless steel
Attention: On some clutches, the bolts may have to be shortened down to the circlip (colloquially known as the Seeger ring or Seeger orbital ring) so that the clutch with installed plate does not touch the clutch basket.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Ø inside | 40 mm |
| Manufacturer | GPO |
| Area of application | Road use |
| Material | Chrome steel (colloquially known as stainless steel) |
| Height | 1.5 mm |
| Ø outside | 90.5 mm |
| Puch | E50 |
Ratings
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: blue · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Ø wire: 1.7 mm · Total length: 28 mm · Number of components: 3 pcs · Area of application: Tuning
20,30 EUR
Axial needle roller bearing 6.4/17/2 clutch original | Puch E50
Bearing cage: Sheet steel cage · Ø inside: 6.4 mm · Manufacturer: Puch · Bearing type: Needle roller and cage assembly · Width: 2 mm · Ø outside: 17 mm · Dimension needle bearing: 6.4/17 x 2 · Area of application: Original · Area of application: Standard · Puch OEM number: 900.6840
33,90 EUR
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: red · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Ø wire: 2 mm · Total length: 26.6 mm · Number of components: 3 pcs · Area of application: Tuning
20,30 EUR
swiing® ingenious clutch springs reinforced (+60%) | Puch E50
Spring design: Pressure spring · Ø wire: 2.05 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: yellow · Total length: 26.9 mm · Ø outside: 8.45 mm · Ø inside: 4.3 mm · Number of components: 3 pcs · Area of application: Tuning
20,30 EUR
swiing® revival thrust washer set Ø 15 / 17 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø inside: 15 mm · Ø inside: 17 mm · Ø outside: 22 mm · Ø outside: 24 mm · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm · Area of application: Standard
44,10 EUR
Explore categories from Clutch
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: blue · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Ø wire: 1.7 mm · Total length: 28 mm · Number of components: 3 pcs · Area of application: Tuning
20,30 EUR
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Performance: 100 W · Type of current: Alternating current (AC) · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
39,60 EUR
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: red · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Ø wire: 2 mm · Total length: 26.6 mm · Number of components: 3 pcs · Area of application: Tuning
20,30 EUR
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø outside: 116 mm · Ø inside: 106 mm · Thickness: 0.5 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
3,30 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Ø outside: 116 mm · Number of components: 1 pcs · Number of fixing points: 4 pcs · Thickness: 1 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
4,45 EUR
Collection only possible with online purchase and appointment.
