Base plate suitable for the three-jaw centrifugal clutch of Puch mopeds / mopeds with E50 engines.
The clutch carrier is made of steel and is extended. The mounting pins can be secured with circlips. In addition, M4 threads are cut into the pins so that a reinforcement plate can be fitted.
The aforementioned plate, clutch linings, complete clutches and the clutch hub without threaded holes can be found in the accessories section.
Original Puch spare part number: 349.1.12.504.2
| Ø inside | 11.85 mm |
| Ø outside | 92.6 mm |
| Material | Steel |
| Area of application | Standard |
| Recording type | Cone mounting |
| Thickness | 19.1 mm |
| Number of jaws | 3 pcs |
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Number of components: 3 pcs · Ø outside: 8.3 mm · Ø inside: 4.8 mm · Color: blue · Area of application: Tuning · Total length: 28 mm
20,80 EUR
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Material: Steel · Material addition: Steel · Number of springs: 3 pcs · Number of jaws: 3 pcs · Recording type: Cone mounting · Ø outside: 92.5 mm · Thickness: 19 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
220,80 EUR
Not in stock
HK clutch "Racing" (with additional weight) Aramid | Puch E50
Manufacturer: HK Clutches · Thickness: 21.2 mm · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Material: Steel · Material addition: Composite materials · Ø outside: 93 mm · Recording type: Cone mounting · Ø inside: 12 mm · Ø inside: 14.6 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
488,10 EUR
DMP clutch "Racing" aluminum reinforced | Puch E50
Manufacturer: DMP · Material: Steel · Material addition: Chrome steel (known as Nirosta®) · Thickness: 22 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 94 mm · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
139,40 EUR
Moped fans also bought
GPO gasket set | Puch E50
Manufacturer: GPO · Number of components: 7 pcs · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Area of application: Standard
11,50 EUR
swiing® ingenious needle roller bearing 12/15/16.2 "Racing" silver cage
Bearing type: Needle roller and cage assembly · Ø inside: 12 mm · Ø outside: 15 mm · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Width: 16.2 mm · Dimension needle bearing: 12/15 x 16.2 · Tomos OEM number: 035548
16,20 EUR
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Number of components: 1 pcs · Ø outside: 116 mm · Number of fixing points: 4 pcs · Ø inside: 106 mm · Color: sand-colored · Thickness: 0.5 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
3,35 EUR
Collection only possible with online purchase and appointment.
