Solid clutch puller for the original clutch and clutches with corresponding hole spacing on your Puch Maxi moped / moped and others with E50 engine.
The clutch pack is screwed on cleanly with the black screws. The large, galvanized screw can then be used to apply pressure to the crankshaft to lift the clutch.
The matching, red anodized cover should always be used to protect the KW stub.
Attention: The tool only fits the original clutch and replacement clutches from Surflex.
Coupling hole spacing: 32 mm
Coupling thread: M6
&slash; inner shaft cover: 12.1 mm
You can find the corresponding clutch and other special tools for the E50 engine in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 905.6.34.109.0
| Manufacturer | swiing® revival parts |
| Area of application | (Dis)assembly tool |
| Puch | E50 |
Accessories & related products
HK clutch "Racing" Aramid | Puch E50
Manufacturer: HK Clutches · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Chrome steel (colloquially known as stainless steel) · Number of springs: 3 pcs · Number of jaws: 3 pcs · Recording type: Cone mounting
350,00 EUR
Explore categories from Clutch
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Ø inside: 12 mm · Ø inside: 14.6 mm · Manufacturer: GPO · Thickness: 20.9 mm · Material: Aluminum · Area of application: Original · Area of application: Standard · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø outside: 93 mm
58,20 EUR
Hot 
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Number of components: 1 pcs · Strength class: 8.8
11,60 EUR
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Decompressor: Yes
11,60 EUR
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Thickness: 0.5 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø outside: 116 mm · Ø inside: 106 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
3,40 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Ø inside: 106 mm · Manufacturer: swiing® revival parts · Thickness: 1 mm · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Number of components: 1 pcs · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
4,55 EUR
Hot
DMP clutch "Racing" aluminum reinforced | Puch E50
Thickness: 22 mm · Manufacturer: DMP · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Chrome steel (colloquially known as stainless steel) · Number of springs: 3 pcs · Number of jaws: 3 pcs · Ø outside: 94 mm · Recording type: Cone mounting
139,90 EUR
Hot
swiing® ingenious 17 mm SRF carburetor camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Nominal diameter: 17 mm · Width: 47 mm · Height: 89 mm · Height: 109 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Total length: 65 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
139,90 EUR
GPO sprocket 35 - 57 teeth black | Puch Maxi S, N / X30 NG-2AH
Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Number of teeth: 35 pcs · Number of teeth: 36 pcs · Number of teeth: 37 pcs · Number of teeth: 38 pcs · Number of teeth: 39 pcs · Number of teeth: 40 pcs · Number of teeth: 41 pcs · Number of teeth: 42 pcs · Number of teeth: 43 pcs · Number of teeth: 44 pcs · Number of teeth: 45 pcs · Number of teeth: 46 pcs · Number of teeth: 47 pcs · Number of teeth: 48 pcs · Number of teeth: 49 pcs · Number of teeth: 50 pcs · Number of teeth: 51 pcs · Number of teeth: 52 pcs · Number of teeth: 53 pcs · Number of teeth: 54 pcs · Number of teeth: 55 pcs · Number of teeth: 56 pcs · Number of teeth: 57 pcs · Chain type: 415H · Ø inside: 94 mm · Chain pitch: 1/2" x 3/16" · Ø bolt circle: 106 mm · Cranking (offset): 8 mm · Ø mounting hole: 6.7 mm
23,20 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
