Rear mudguard made of stainless steel for various mopeds with 17-inch rims.
The highly polished surface ensures a first-class look and gives your moped the necessary shine.
Since the mudguard is folded at the rear, there is no sharp edge, which significantly reduces the risk of injury.
Tabs for cable routing are attached to the inside.
The mudguard deliberately has no holes for struts so that you can drill them individually.
Shape: round
Width of mudguard profile (A): 80 mm
Height of mudguard profile (B): 35 mm
End: closed folded / not folded
Material: chrome steel (colloquially known as stainless steel), highly polished
Total height from support surface to top edge (C): 325 mm
Total length over ends (D): 623 mm
Circumference (E): 1006 mm
Further parts for your wheel fairing, such as stainless steel polish or fastening material, can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | polished |
| Color | Chrome |
| Folding the ends | closed folded, not folded |
| Shape of the mudguard | partly round |
| Total length over ends | 623 mm |
| Scope | 1006 mm |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 325 mm |
| Wheel size | 17 " |
| Mounting type | Nuts & bolts |
Accessories & related products
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Width: 105 mm · Thread type: M5x0.8 (standard thread) · Height: 5.3 mm · Total length: 145 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread length: 8 mm · Mounting type: Nuts & bolts
12,70 EUR
swiing® revival 17" front fender "Retro" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Color: Chrome · Surface: polished · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Wheel size: 17 " · Mounting type: Nuts & bolts
69,90 EUR
Mudguard strut 17" chrome
Manufacturer: Made in Italy · Material: Steel · Color: Chrome · Surface: chrome-plated · Total length: 325 mm · Distance mudguard - center hole: 315 mm · Number of fixing points: 5 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Hole spacing: 19 mm · Wheel size: 17 " · Wide intake: 65 mm · Mounting type: Nuts & bolts
15,10 EUR
Mudguard strut 16" chrome
Manufacturer: Made in Italy · Material: Steel · Surface: galvanized (blue) · Total length: 305 mm · Distance mudguard - center hole: 290 mm · Number of fixing points: 5 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Wheel size: 16 " · Wide intake: 75 mm · Mounting type: Nuts & bolts
20,90 EUR
GPO license plate holder Inox black (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: black-matt · Surface: varnished · Width: 105 mm · Thread type: M5x0.8 (standard thread) · Height: 6 mm · Total length: 147 mm · Number of fixing points: 6 pcs · Ø mounting hole: 5 mm · Mounting type: Nuts & bolts
15,10 EUR
Explore categories from Mudguard
Moped fans also bought
Inox
Hot
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Width: 105 mm · Thread type: M5x0.8 (standard thread) · Height: 5.3 mm · Total length: 145 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread length: 8 mm · Mounting type: Nuts & bolts
12,70 EUR
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
2,35 EUR
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
13,40 EUR
29,78 EUR/l
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Ø bore: 4.05 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain type: 415H · Chain lock type: Spring lock · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1448 mm · Ø Pin: 4 mm
22,10 EUR
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Cable length: 2250 mm · Number of components: 1 pcs · Piaggio OEM number: 270460
2,80 EUR
Cable sleeve, Ø 5 x 2.2 mm, black (6-meter roll)
Ø inside: 2.5 mm · Manufacturer: Made in Italy · Ordering unit: Roll 6 meter · Material: Plastic · Material: Steel · Color: black · Ø outside: 5 mm · Total length: 6000 mm · Coating: none · Ø cable: 2.2 mm · Area of application: Standard
13,90 EUR
2,32 EUR/m
Hot
Manual indoor cable set
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
11,60 EUR
ESJOT Gear Ring, 37 Teeth, Reverse, Galvanized
Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Thickness: 4.1 mm · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 37 pcs · Ø inside: 94 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6.5 mm · Hole spacing: 74 mm · Ø bolt circle: 105.5 mm
55,90 EUR
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Plastic · Color: black · Width: 68 mm · Height: 52 mm · Filter type: Racing screen · Total length: 165 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Area of application: Tuning
69,90 EUR
swiing® revival 17" front fender "Retro" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Color: Chrome · Surface: polished · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Wheel size: 17 " · Mounting type: Nuts & bolts
69,90 EUR
Working late? Evening hours on Thursday until 20:00
