38 mm tuning cylinder in the "Power Edition" version made of aluminum including cylinder head with 50 cc displacement suitable for mopeds / mopeds with Sachs 503 2AL, AAL, 2BL, ABL CH engine.
The tuning kit made of cast aluminum with nickel-silicon carbide coating (colloquially known as Nikasil) offers a good increase in performance over the entire speed range, with a focus on low speeds and high torque. Compared to the original cylinder, this tuning cylinder has had the seal removed and the inlet enlarged. The overflow channels as well as the exhaust and intake have been adapted to optimize the timing. In addition, the exhaust duct has been designed at a more favorable angle. All housing covers can still be fitted.
Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 38 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Camouflaged: No · Area of application: Tuning
| Manufacturer | AKOA |
| Camouflaged | No |
| Area of application | Tuning |
| Material | Aluminum |
| Surface | Nickel silicon carbide (colloquially known as Nikasil) |
| Displacement | 50 ccm |
| Crankshaft stroke | 43 mm |
| Ø piston pin (B) | 12 mm |
| Ø cylinder neck | 45.5 mm |
| Nominal diameter | 38 mm |
| Ø Outlet outside | 25.9 mm |
| Ø outlet inside | 20.5 mm |
| Ø Inlet inside | 15.8 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 32 mm |
| Hole pattern [mm] | 40 x 60 / 37 x 37 |
| Outlet type | clamped |
| Number of fixing points | 4 pcs |
| Sachs | 503 - AAL , ABL , 2AL / 2BL |
Accessories & related products
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Nozzle size: 62 · Height: 95 mm · Nominal diameter: 15 mm · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Width: 50 mm · Vacuum connection: No · Total length: 66 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m
93,20 EUR
GPO 41 mm "Pomodoro" cylinder kit | Sachs 503
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Area of application: Tuning
209,90 EUR
Not in stock
GPO 43 mm "Pomodoro" cylinder kit | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: GPO · Area of application: Tuning · Material: Gray cast iron · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Nominal diameter: 43 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Hole pattern [mm]: 40 x 60 / 37 x 37 · Outlet type: clamped · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
256,60 EUR
swiing® ingenious 15 mm intake manifold short version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Thread type: M6x1 (standard thread) · Ø External connection: 20 mm · Ø inside: 15 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 32 mm · Total length: 50 mm · Alternative version of the Pony OEM number: A2177
58,20 EUR
swiing® ingenious decompressor set | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Copper · Material: Steel · Thread type: M10x1.5 (standard thread) · Thread length: 14 mm · Ø outside: 14 mm · Total length: 21.5 mm · Width across flats: 14 mm · Area of application: Standard · Sachs OEM no.: 0291 013 300
58,20 EUR
AKOA 38 mm cylinder head "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Area of application: Tuning · Ø cylinder: 38 mm · Ø outside: 84 mm · Candle thread: short · Number of fixing points: 4 pcs · Height: 29 mm · Hole pattern [mm]: 37 x 37 · Decompressor: No · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
58,20 EUR
AKOA 40 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Area of application: Tuning · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 54 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 40 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 20.5 mm · Hole pattern [mm]: 40 x 60 / 37 x 37 · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole spacing inlet: 32 mm · Camouflaged: No
244,90 EUR
AKOA 41 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 41 mm · Manufacturer: AKOA · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37
244,90 EUR
Not in stock
AKOA 43 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 43 mm · Manufacturer: AKOA · Area of application: Tuning · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No
315,00 EUR
Explore categories from Cylinder
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch · Temperature resistance (min.): -30 - 220 °C
12,70 EUR
28,22 EUR/l
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Stock number: BO15 · Inner ring width: 10 mm · Manufacturer: NSK · Bearing cage: Brass cage ball-guided · Material: Brass · Area of application: Standard · Material: Steel · Bearing type: Shoulder bearing · Width: 10 mm · Ø inside: 15 mm · Ø outside: 40 mm · Ball bearing closed: No · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
29,10 EUR
Hot
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Nozzle size: 62 · Height: 95 mm · Nominal diameter: 15 mm · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Width: 50 mm · Vacuum connection: No · Total length: 66 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m
93,20 EUR
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Plastic · Area of application: Tuning · Filter type: Racing screen · Color: black · Total length: 165 mm · Ø Internal connection: 20 mm · Width: 68 mm · Mounting type: Plug connection clamped · Height: 52 mm
69,90 EUR
AKOA 38 mm cylinder head for decovalve | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Area of application: Tuning · Ø cylinder: 38 mm · Ø outside: 84 mm · Candle thread: short · Number of fixing points: 4 pcs · Height: 29 mm · Hole pattern [mm]: 37 x 37 · Decompressor: M10x1.5 · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
69,90 EUR
AKOA 38 mm cylinder head "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Area of application: Tuning · Ø cylinder: 38 mm · Ø outside: 84 mm · Candle thread: short · Number of fixing points: 4 pcs · Height: 29 mm · Hole pattern [mm]: 37 x 37 · Decompressor: No · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
58,20 EUR
AKOA 38 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 38 mm · Manufacturer: AKOA · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No
209,90 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
