Aluminum cover plate for the reed valve inlet of the 47 mm Gilardoni italkit Puch cylinder kit.
The reed valve cover is used to close the reed valve system and convert the cylinder kit to a housing inlet (GME).
Outer dimensions: 72.5 x 48 mm
Hole pattern: 60 x 35 mm
Material thickness: 8 mm
Material: aluminum
You can find corresponding additional material such as seals, sealing compound etc. in the accessories section.
| Manufacturer | MBR |
| Material | Aluminum |
| Area of application | Tuning |
| Width | 48 mm |
| Total length | 72.5 mm |
| Thickness | 8 mm |
| Mounting type | Screws |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 60 x 35 mm |
| Puch |
Accessories & related products
Gilardoni italkit 47 mm Cylinder Kit (without head) | Puch E50 / Z50 / ZA50
Manufacturer: Gilardoni italkit · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Ø piston pin (B): 12 mm · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 47 mm · Ø cylinder neck: 51 mm · Ø Inlet inside: 18.3 mm · Inlet window: 38.5 x 25.8 mm · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 26.5 mm · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: slanted · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No
244,90 EUR
Not in stock
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Manufacturer: Elring · Area of application: Chemistry · Color: red · Contents: 70 ml · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 300 °C
26,70 EUR
381,43 EUR/l
Explore categories from Carburetor & intake system
Moped fans also bought
Hot 
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Width across flats Screw: 19 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8
11,60 EUR
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Color: silver · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Total length: 18 mm · Thread length: 12 mm · Width across flats Screw: 13 mm · Thread type: M8x1.25 (standard thread) · Puch OEM number: 901.1053
4,10 EUR
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Number of components: 2 pcs · Total length: 6 mm · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Surface: nickel-plated · Screw head: Lens head · Thread length: 4 mm · Thread type: M4x0.7 (standard thread)
2,35 EUR
Hot
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Area of application: Motor bracket · Material: Steel · Surface: varnished · Color: red · Color: white · Width: 245 mm · Height: 340 mm · Total length: 370 mm · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Hole spacing: 21.5 mm · Material thickness: 3.5 mm
87,40 EUR
Hot
swiing® ingenious Cable-Pull Starter for MVT Ignition | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black-matt · Ignition system: MVT Allumage · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm · Height: 82 mm · Total length: 170 mm · Width: 150 mm
174,90 EUR
Working late? Evening hours on Thursday until 20:00
