Solid clutch puller for the original clutch and clutches with corresponding hole spacing on your Puch Maxi moped / moped and others with E50 engine.
The clutch pack is screwed on cleanly with the black screws. The large, galvanized screw can then be used to apply pressure to the crankshaft to lift the clutch.
The matching, red anodized cover should always be used to protect the KW stub.
Attention: The tool only fits the original clutch and replacement clutches from Surflex.
Coupling hole spacing: 32 mm
Coupling thread: M6
&slash; inner shaft cover: 12.1 mm
You can find the corresponding clutch and other special tools for the E50 engine in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 905.6.34.109.0
| Manufacturer | swiing® revival parts |
| Area of application | (Dis)assembly tool |
| Puch | E50 |
Ratings
Accessories & related products
HK clutch "Racing" Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Chrome steel (colloquially known as stainless steel) · Number of springs: 3 pcs · Recording type: Cone mounting · Number of jaws: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
350,00 EUR
Explore categories from Clutch
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Ø inside: 12 mm · Ø inside: 14.6 mm · Manufacturer: GPO · Area of application: Original · Area of application: Standard · Material: Aluminum · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 93 mm · Thickness: 20.9 mm
58,20 EUR
Hot 
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Total length: 55 mm · Total length: 75 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Width across flats Screw: 19 mm · Number of components: 1 pcs · Strength class: 8.8
11,60 EUR
Not in stock
GPO gasket set | Puch E50
Manufacturer: GPO · Area of application: Standard · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Number of components: 7 pcs · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
11,60 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Ø inside: 106 mm · Manufacturer: swiing® revival parts · Color: sand-colored · Material: Sealing paper · Ø outside: 116 mm · Thickness: 1 mm · Number of components: 1 pcs · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
4,55 EUR
Hot
DMP clutch "Racing" aluminum reinforced | Puch E50
Manufacturer: DMP · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Material: Steel · Material addition: Chrome steel (colloquially known as stainless steel) · Number of springs: 3 pcs · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 94 mm · Thickness: 22 mm
139,90 EUR
Hot
swiing® ingenious 17 mm SRF carburetor camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Total length: 65 mm · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Mounting type: Plug connection clamped · Ø Output inside: 17.1 mm · Width: 47 mm · Ø Air filter connection: 27.5 mm · Height: 89 mm · Height: 109 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
139,90 EUR
GPO sprocket 35 - 57 teeth black | Puch Maxi S, N / X30 NG-2AH
Material: Steel · Surface: varnished · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Color: black · Number of teeth: 35 pcs · Number of teeth: 36 pcs · Number of teeth: 37 pcs · Number of teeth: 38 pcs · Number of teeth: 39 pcs · Number of teeth: 40 pcs · Number of teeth: 41 pcs · Number of teeth: 42 pcs · Number of teeth: 43 pcs · Number of teeth: 44 pcs · Number of teeth: 45 pcs · Number of teeth: 46 pcs · Number of teeth: 47 pcs · Number of teeth: 48 pcs · Number of teeth: 49 pcs · Number of teeth: 50 pcs · Number of teeth: 51 pcs · Number of teeth: 52 pcs · Number of teeth: 53 pcs · Number of teeth: 54 pcs · Number of teeth: 55 pcs · Number of teeth: 56 pcs · Number of teeth: 57 pcs · Ø bolt circle: 106 mm · Ø inside: 94 mm · Ø mounting hole: 6.7 mm · Cranking (offset): 8 mm
23,20 EUR
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Ø inside: 17 mm · Manufacturer: swiing® ingenious parts · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Ø External connection: 23 mm · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm · Total height: 53.5 mm · Height flange center hole: 42 mm · Total length: 38 mm · Number of fixing points: 2 pcs · Camouflaged: Yes
52,40 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
